LTU xbox360 slim E 4GB

[Janclaude]

Hello people, I should make the change of the reader on a corona v6 suppose (xbox slim 4gb E) had made a list material but I was in doubt, and I wanted to ask you to confirm this. For the read / write nand and start RGH (extraction dvd key) I would use Xecuter Crown 4GB Nand Kit + RW Xecuter DGX v1.0S Slim + Xecuter Post Fix Adapter v2
To change the reader just take a pcb editable / unlockable and write to the appropriate firmware.
Then I think I do not need nothing else I suppose, could you give me confirmation of this, for those who have already made a similar change?
Thank You.

 

[BrockThunderjam]

You probably won't find a dgx anywhere. Will have to be cr4. You'll need to find out which drive you have as well (my guess would be 16d5s but you will need to confirm before ordering ltu2 PCB). Sounds like you're on the right track though. You'll def need 4gb r/w kit and postfix.


Sent from my iPhone using Tapatalk

 

[Janclaude]

The DGX already possess it, I wanted to avoid the expense of CR4

 

[playingmax]

u could use the dgx. u will also need an ltu 2.0 pcb.

 

[BL4K3Y]

If you just need to boot XeLL for the CPU key, the DGX should work fine.

Once you have a NAND dump and the console's CPU key, you can extract the files required for LTU.

Remember to use a DGX ECC image if your DGX has not been converted to RGX.

A "regular" ECC image might work, but I can't confirm this.

 

[Janclaude]

ok thanks, I'll just get the material modification