LITEON DG-16D4S - SLIM LTU2 board can not read any disk

wojtech.nettle

Full Member
Mar 4, 2013
56
0
Czech republic
It is a manual spoof


I will try to explain the process: I connected the drive and read the key. Then I saved the FW as dummy.bin. Then I load LTU2 fw-0401-v1.0.bin and I used manual spoof. The key is copied to the target. Then I changed the pcb and followed the guide.
 

Utmad

VIP Member
Aug 15, 2010
3,309
118
Southampton, UK
It is a manual spoof


I will try to explain the process: I connected the drive and read the key. Then I saved the FW as dummy.bin. Then I load LTU2 fw-0401-v1.0.bin and I used manual spoof. The key is copied to the target. Then I changed the pcb and followed the guide.
Not sure what guide you followed as you shoud have followed this one

http://team-xecuter.com/forums/showthread.php?t=138374

the only difference is the firmware as you have a 16D4S
 

unkn0wn.92

VIP Member
Jun 30, 2011
665
48
AMM,Jordan
you still need the nand and CPU key to get the needed files as the guide posted above and make the LTU2.bin for your OSIG