LITEON DG-16D4S - SLIM LTU2PCB DG16D4S 0225

bigalorr

bigalorr

Junior Member
Nov 9, 2010
18
0
Hello people almost there i think,i have the D4S/D5S compatible LTU2PCB installed into my slim D4S 0225f/w, extracted key no problem,after much searching found LTU-0225-V1.0.bin f/w. That flashed no problem.Now the xbox slim will only play DVD's - not original or back up games. I remember havin this problem years ago with a PHAT and it turned out it was wrong firmware then. But this is the only f/w available for LTU2PCB slim 0225:confused:.
Can anyone help me out here ta
 
bigalorr

bigalorr

Junior Member
Nov 9, 2010
18
0
Hi i tried original disc, bundled disc(says put this disc in an xbox) , back up disc - nothin. DVD plays right away:confused:
 
bigalorr

bigalorr

Junior Member
Nov 9, 2010
18
0
Yes i did slimkey with jf 1.96
only thing i see different is MD5hash code is different on jf log to one on f/w release if thay means anything
jf log md5-f01719abde195269a98cfe1e984f3d60
LTU-0225-v1.0.bin md5 is -D6AB7CCD7BBC1301762E6EFF602AFAC3
JungleFlasher 0.1.96 Beta (323)


Session Started Sun Sep 22 23:11:02 2013






This is a Wow 64 process running on 6 x 64 bit CPUs


X360USB PRO detected, Version 0.20






Found 1 I/O Ports.


Found 1 Com Ports.


Found 4 windows drives C: D: E: G:


Found 1 CD/DVD drives E:






Loading firmware file C:\Users\DAD\Desktop\Dummy.bin


MD5 hash: f01719abde195269a98cfe1e984f3d60


Inquiry string found


Identify string found


Drive key @ 0xA030 A83F299594007BA278CC23D44C18AB27


Firmware Osig: [PLDS DG-16D4S 0225]


Firmware is: SlimKey Extract


Loading firmware file C:\Users\DAD\Desktop\jungle flasher 1.96\JungleFlasher v0.1.96 Beta (323)\firmware\LTU2-0225-v1.0.bin


MD5 hash: d6ab7ccd7bbc1301762e6eff602afac3


Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF


Firmware Osig: [PLDS DG-16D4S 0225]


Firmware is: LTU2 v1.0


Spoofing Target


DVD Key copied to target


Inquiry string copied to Target


Identify string copied to Target






Sending Vendor Intro to port 0x0000


Status 0x80


Re-sending Vendor Intro:


.......


Serial flash found with Status 0x72






Sending Device ID request to port 0x0000


Spi Status: 0x8C


Manufacturer ID: 0xEF


Device ID: 0x11


Flash Name: Winbond/NEX(W25P20/NX25P20)


Flash Size: 262144 bytes






Sending Spi UnLock request to Port 0x0000


.


Spi Status: 0x00






Getting Status from port 0x0000


SPi flash found with Status 0x72






Sending Chip Erase to Port 0x0000


Erasing:


Writing target buffer to flash


Writing Bank 0: ................


Writing Bank 1: ................


Writing Bank 2: ................


Writing Bank 3: ................






Flash Verification Test !


Reading Bank 0: ................


Reading Bank 1: ................


Reading Bank 2: ................


Reading Bank 3: ................


Write verified OK !










Sending Spi Lock request to Port 0x0000


Spi Status: 0x8C


Sending Vendor Outro to port 0x0000


Drive is Slim Lite-On..
 
gazcoigne

gazcoigne

BANNED
Jan 31, 2005
1,106
0
Belfast, UK
if you have slimkey extract from your drive you DO NOT use LTU, you use LT3.0

LTU requires information from RGH extract, and you are not building the fw correctly. when you load LTU and spoof your key over, it actually doesnt spoof your key into the LTU fw. save your LTU and reopen it as source you will see diferent dvd key hence the insert game error.

build a LT3.0 image using your dummy.bin and see what happens
 
bigalorr

bigalorr

Junior Member
Nov 9, 2010
18
0
First answer original pcb is ok,.Thats out now along with key extraction. TX LTU2PCB is installed JF log is with LTU2PCB installed and the only firmware it would take all the way to outra was LTU2-0225-v1.0.bin.I thought you didn't have to RGH 0225's?
Sorry to be a pain but how do you build LT3.0 image using your dummy.bin
i thought you bought LTU2PCB flashed with key and f/w:facepalm:

TX LTU2PCB is from ck3.co.uk
https://www.ck3.co.uk/tx-liteon-dg-16d5s-ltu2-unlocked-pcb.html
 
Last edited:
gazcoigne

gazcoigne

BANNED
Jan 31, 2005
1,106
0
Belfast, UK
if you have a LTU pcb, AFAIK only a LTU image will work with it, so therefore you will need to RGH your system to obtain the NAND extracts key.bin and CR.bin to be able to correctly build a LTU firmware.

LT3.0 is only for normal unlocked boards or the older TX boards. LTU boards are made specifically for LTU firmware, LT3.0 wont work on it.

so either purchase a normal unlocked PCB, OR kamikaze unlock your original PCB and flash LT3.0 to it. to make LT3.0 load your dummy.bin as source and JF will auto load lt3.0.

to use your LTU pcb, you must RGH then system, then reflash the original NAND and remove the install, and make correct LTU image and flash it to the drive .
 
bigalorr

bigalorr

Junior Member
Nov 9, 2010
18
0
Well am gonna have to ask for a refund on TX LTU2PCB then because if you read about item on site it says it is effortless and makes replacing your faulty drive easy with your key and LTU f/w and cheaper than sending away for costly repairs.LTU2 is way lot easier than LTU1 apparently.Well if anything at least someone who reads this might have second thoughts on buying one
 
bigalorr

bigalorr

Junior Member
Nov 9, 2010
18
0
What!! did you read item for sale it clearly states it is for DG16D4S/DG16D5S 0225 drives
 
gazcoigne

gazcoigne

BANNED
Jan 31, 2005
1,106
0
Belfast, UK
and it does exactly what it says on the tin.

its your fault that you do not have a clue how to use it correctly.

the answer is simple, your just not understanding it.

RGH your system, obtain files and you can build the FW required.

the install guide clearly explains the steps required. perhaps you should have read them before you jumped in feet first!!
 
U

unique904

Noob Account
Jun 29, 2009
1
0
uk, Barnsley
can some explain what this post below actually means as i'm also under the impression that RGH isnt need for the 16d4s with the LTU boards, it looks to me after reading this that the key.bin cr.bin are some how taken from the original boards but after looking through jungleflasher and taking reads theres no new info extracted with lastest jungleflasher so it is confusing

JungleFlasher 0.1.96(323)
========================================
support for Xecuter additional LTU2 files for DG-16D4S support
added extraction for DG-16D4S serial info from original drive at KeyCR time for LTU2 and LTU1
 
gazcoigne

gazcoigne

BANNED
Jan 31, 2005
1,106
0
Belfast, UK
from ck3.co.uk.....

The Liteon DG-16D4S/DG-16D5S LTU2 & Hitachi DL10N Unlocked Replacement PCB has been manufactured so it is much cheaper than the original LTU PCB - get them while they are available they will be hot sellers !



  • Fits all versions of Liteon DG-16D4S and DG-16D5S (Red Liteon Version)
  • Supports the latest LTU2 fw
  • Easily programmable using the X360USB PRO V1 or V2 (Update to the latest firmware v20.1)
  • Compatible with professional power adapters such as the X360USB PRO V2, CK3 Pro & CK3 Mini
  • Requires the latest Jungle Flasher & J-Runner
  • C4E's new LTU2 (LT Ultimate v2) firmware now allows booting of any Liteon or Hitachi based system without any previous firmware dump (inc the DG-16D4S 0225/0272/0401/1071 and DG-16D5S 1175/1532 and Hitachi 0500/0502 firmwares) – all you need is the DVD Key and FCRT.bin which can be extracted using RGH or DGX methods.
  • Includes solderless quick install adapter
  • Includes external SPI unlock/lock switch
  • Includes external vendor switch
  • Includes heatsink for drive controller IC
  • Every board has a unique serial number which can be checked at serial.xecuter.com
  • Note: Due to how the custom chipset has had to be designed there is no CD/CD-R support.

you blind?
 
gazcoigne

gazcoigne

BANNED
Jan 31, 2005
1,106
0
Belfast, UK
when building the LTU2 fw, and you feed JF your extracted files you are meant to have the original PCB hooked up, and it reads more unique data from the drive for your LTU2 firmware.

you still need the RGH done to obtain the key.bin CR.bin files to be able to build the LTU2 fw in the first place.
 
X

xbox2712

Full Member
Jun 3, 2013
64
0
If your console has a DG16D4S then a LTU should not be needed, just get the DVDKey from it and then use it in a regular replacement PCB unit, simple.
 
You must log in or register to reply here.