I had to go back into my mother board because the D0 connection had broken free. Here's the problem, however, the on board circuit wire has now lifted free from the board and I am having a difficult time putting it back into place. Also does the D0 solder poing indicate that another connection is coming from the opposite side. What is the best way to correct this problem? Thanks
Major D0 problems - Help!
- Thread starter amdg
- Start date
Here is a good tut on rebuilding traces
http://www.llamma.com/xbox/Repairs/repairing_traces_and_lifted_pads.htm
http://www.llamma.com/xbox/Repairs/repairing_traces_and_lifted_pads.htm
u can also use a circuit pen from radio shack. i buy broken boxes off of ebay and sell them and that what i use to repair the traces
Bit nooby here,what exactly does CK3 pro/lite kit DO?
So i dont get it.Whats d use of these kits.Sumwhere i read dat its just to power on the drive.Is it so.Plz explain!
thank u for ya time
So i dont get it.Whats d use of these kits.Sumwhere i read dat its just to power on the drive.Is it so.Plz explain!
thank u for ya time
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
u can use the ck3 pro to extract your key off a 7 serious drive also use it to power on off drive
u can use the ck3 pro to extract your key off a 7 serious drive also use it to power on off drive
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
Dude as far as i know,a probe is used to extract a key.So if i get a USB probe,then this wont b required.Isnt it.Coz i read a method(tricky according to JF tut) that u can also power on the drive with X360 itself.I think dat will save me sum buX.However i will hav to buy VIA6421.BTW is this d required card
http://cgi.ebay.com/IDE-PCI-SATA-Serial-ATA-Card-PC-VIA-VT6421A-6421-/190391549106?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2c54387cb2
or this one
http://cgi.ebay.com/IDE-PCI-SATA-Serial-ATA-Card-6421-VIA-VT6421A-6421A-PC-/110555558017?cmd=ViewItem&pt=AU_Computer_Components_Controller_Cards&hash=item19bd9ff081
Thnx!
Dude as far as i know,a probe is used to extract a key.So if i get a USB probe,then this wont b required.Isnt it.Coz i read a method(tricky according to JF tut) that u can also power on the drive with X360 itself.I think dat will save me sum buX.However i will hav to buy VIA6421.BTW is this d required card
http://cgi.ebay.com/IDE-PCI-SATA-Serial-ATA-Card-PC-VIA-VT6421A-6421-/190391549106?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2c54387cb2
or this one
http://cgi.ebay.com/IDE-PCI-SATA-Serial-ATA-Card-6421-VIA-VT6421A-6421A-PC-/110555558017?cmd=ViewItem&pt=AU_Computer_Components_Controller_Cards&hash=item19bd9ff081
Thnx!
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
Dude yes u need a VIA642 card
what drive is in your 360
Dude yes u need a VIA642 card
what drive is in your 360
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
i know i need a via card.I asked abt CK3 pro/lite.Will gettin a usb probe n powering drive with x360 itself GET THE JOB DONE without d need of CK3. .Plz tell
i know i need a via card.I asked abt CK3 pro/lite.Will gettin a usb probe n powering drive with x360 itself GET THE JOB DONE without d need of CK3. .Plz tell
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
The only way you can use just a probe and the xbox 360 as a power source is to make one yourself (ghetto style) or power a ck3 probe or otherwise from external source (ie patch it into a molex connector from your pc)
Here's a nice tutorial on making a probe for free from electronic parts :
http://xbox-experts.co.uk/tutorial/assembling-a-liteon-probe-pictorial/
Also, do me a favour, next time you have questions and all are n00b related, there is NO need to make a new thread for each question, just list them all in the same thread ok?
Cheers!
The only way you can use just a probe and the xbox 360 as a power source is to make one yourself (ghetto style) or power a ck3 probe or otherwise from external source (ie patch it into a molex connector from your pc)
Here's a nice tutorial on making a probe for free from electronic parts :
http://xbox-experts.co.uk/tutorial/assembling-a-liteon-probe-pictorial/
Also, do me a favour, next time you have questions and all are n00b related, there is NO need to make a new thread for each question, just list them all in the same thread ok?
Cheers!
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
Well sorry for my n00by posts.i will ask questions in same thread.well i said i will purchase a USB probe which can connect thro computer's USB port.Then y do i need to make one.N i according to JF tut, u can power d drive with x360 itself.then wats a molex adapter n y do i need one.Well i think deres nothin wrong in JF tut.Is it!!
Well sorry for my n00by posts.i will ask questions in same thread.well i said i will purchase a USB probe which can connect thro computer's USB port.Then y do i need to make one.N i according to JF tut, u can power d drive with x360 itself.then wats a molex adapter n y do i need one.Well i think deres nothin wrong in JF tut.Is it!!
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
Its Good Ur Learning A Lot Axis (No Prob Its Not Nooby , nooby is like "I Got White smoke from my xbox drive , is it hacked now?/What is A DVD Drive LOL?")
Well Ill explain all the methods to you,
for samsung benq and hitachi,
u just need a sata cable and u CAN Power It Through The Xbox itself or buy a ck3 lite to power it. its much more easier to use the ck3 as thousands of things can get screwed up...
now a days, almost all drives ,9 outta 10 , are liteons....
so we'll focus on lite on since others are easy to flash .
for 7xxxx series->Buy Ck3 Pro(Since USB Is needed to get the key)with a probe v1.
8xxxx v1-> Same as benq...easy
8xxxx v2 / 9xxxx -> Probe v2 is required and a ck3 lite or pro.....(whichever since ur not gonna use the usb or rs232)
BTW U Might wanna check out for the lt clip + switch v2 which has been recently released
http://www.ck3.co.uk/xecuter-lt-clip-and-lt-switch-v2-no-solder.html
its used for the 8xxxx v2 /9xxxx inplace of probe....
Its Good Ur Learning A Lot Axis (No Prob Its Not Nooby , nooby is like "I Got White smoke from my xbox drive , is it hacked now?/What is A DVD Drive LOL?")
Well Ill explain all the methods to you,
for samsung benq and hitachi,
u just need a sata cable and u CAN Power It Through The Xbox itself or buy a ck3 lite to power it. its much more easier to use the ck3 as thousands of things can get screwed up...
now a days, almost all drives ,9 outta 10 , are liteons....
so we'll focus on lite on since others are easy to flash .
for 7xxxx series->Buy Ck3 Pro(Since USB Is needed to get the key)with a probe v1.
8xxxx v1-> Same as benq...easy
8xxxx v2 / 9xxxx -> Probe v2 is required and a ck3 lite or pro.....(whichever since ur not gonna use the usb or rs232)
BTW U Might wanna check out for the lt clip + switch v2 which has been recently released
http://www.ck3.co.uk/xecuter-lt-clip-and-lt-switch-v2-no-solder.html
its used for the 8xxxx v2 /9xxxx inplace of probe....
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
lol.(white smoke-good one dude).BTW dont u think that usin probe V2 is much easier for 8xx V2 and 9xx liteon than soldering.I mean soldering is a nightmare to me.BTW u know wat,i will try to get pre 2009-2008 x360 off ebay.So flashing shud b relatively easier.thnx for all ya help dude.M startin to love dis site dude!Seriously!
lol.(white smoke-good one dude).BTW dont u think that usin probe V2 is much easier for 8xx V2 and 9xx liteon than soldering.I mean soldering is a nightmare to me.BTW u know wat,i will try to get pre 2009-2008 x360 off ebay.So flashing shud b relatively easier.thnx for all ya help dude.M startin to love dis site dude!Seriously!
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
Hey i have a question.now that gettin a CK3 is compulsory,shud i get pro/lite.BTW i dont know which liteon X360 will i get.So is it safe to get a CK3 pro +probe V2(if unfortunately i get a 8xxx V2 or 9xxx).But if i get a 7xxx or 8xxx V1,then will that probe V2 work with that.I mean its created for flashing 8xxx V2 and 9XXX.but will it flash 7xxx and 8xx V1 also.
Hey i have a question.now that gettin a CK3 is compulsory,shud i get pro/lite.BTW i dont know which liteon X360 will i get.So is it safe to get a CK3 pro +probe V2(if unfortunately i get a 8xxx V2 or 9xxx).But if i get a 7xxx or 8xxx V1,then will that probe V2 work with that.I mean its created for flashing 8xxx V2 and 9XXX.but will it flash 7xxx and 8xx V1 also.
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
yea probe v2 is backward compatible,
just use one of those 2 needles /prongs
btw i've been reading ur previous posts,
the ck3 doesnt have a usb probe, just a usb port to connect to the usb at the back of the comp to dump key, the probe is also needed...
yea probe v2 is backward compatible,
just use one of those 2 needles /prongs
btw i've been reading ur previous posts,
the ck3 doesnt have a usb probe, just a usb port to connect to the usb at the back of the comp to dump key, the probe is also needed...
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
who said CK3 has usb probe.BTW i was talkin abt this on ebay
http://cgi.ebay.com/Connectivity-Kit-V3-CK3-USB-Liteon-solderless-Probe-/270593526051?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3f00a18923
BTW i hav dropped its plan coz that thisng is 30$ i can get ck3 pro+probe V1 for abt 38$.that sounds SAFER!__
who said CK3 has usb probe.BTW i was talkin abt this on ebay
http://cgi.ebay.com/Connectivity-Kit-V3-CK3-USB-Liteon-solderless-Probe-/270593526051?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3f00a18923
BTW i hav dropped its plan coz that thisng is 30$ i can get ck3 pro+probe V1 for abt 38$.that sounds SAFER!__
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
thats not a ck3 probe, thats just the usb for transferring the key......
ull have to buy a ck3 probe too...
i suggest u buy ur xbox first, look up the drive and then buy the corresponding hardware....
buy from
www.ck3.co.uk
they ship to india..
thats not a ck3 probe, thats just the usb for transferring the key......
ull have to buy a ck3 probe too...
i suggest u buy ur xbox first, look up the drive and then buy the corresponding hardware....
buy from
www.ck3.co.uk
they ship to india..
Re: Bit nooby here,what exactly does CK3 pro/lite kit DO?
Ok ok,my bad.I get it now.But the thing is that i will order x360+CK3+probe+VIA6421 at once from us.So i was askin ,is that probe V2 backwards compatable.Well i got my answer.Hey do u think i will need CK3 pro for liteon 8xx v2 or 9xx.,or will CK3 lite sufficient.BTW thnx 4 ya help man.
Good day!
Ok ok,my bad.I get it now.But the thing is that i will order x360+CK3+probe+VIA6421 at once from us.So i was askin ,is that probe V2 backwards compatable.Well i got my answer.Hey do u think i will need CK3 pro for liteon 8xx v2 or 9xx.,or will CK3 lite sufficient.BTW thnx 4 ya help man.
Good day!