major problems, need major help

bigbob_75056

Full Member
Feb 7, 2005
62
0
i am new at modding, but i have a 1.6 xbox. i have soldered and installed everything, the best of my ablity, but some thing went wrong. when i first turned it on the panel for the chip turned red then my box died, a few seconds later it came on and the panel was blue, with no display though. after that it turns on, the panel is red then it dies, it boots and dies, and boots, but the large circle on the xbox flashes red and green, what did i do, am i screwed, can i fix it, please the love of pete help me i dont beg, but i need help
 

bigbob_75056

Full Member
Feb 7, 2005
62
0
i was reading and some mentioned a FRAG AND SERCH BUTTON, what are those if anyone can help i am new to this
 

sb122606

VIP Member
Nov 26, 2004
876
0
England
FRAG (Flashing Red And Green)
Search is the button at the top of the forums page ..u should be able to search in the forums for solutions to problems that other installers have had/resolved.

FRAG is going to come back on a search as soldering....
Check it and check it again...99.9 Frags are bad solder..
Redo each point on the pin header ...you should then get 2 blue lights on your chip plus a red(bios protect off) if u have the CE version
 

icecreamguys

VIP Member
Nov 8, 2004
318
0
Utah
bigbob_75056 said:
i was reading and some mentioned a FRAG AND SERCH BUTTON, what are those if anyone can help i am new to this
That is ALMOST signature worthy..
 

bigbob_75056

Full Member
Feb 7, 2005
62
0
hey thanks