MAX Payload Tool CDB failed.

Status
Not open for further replies.
I got a new drive yesterday, it is a HP 1260i which is 'apparently' on the Max payload compatibility list.

When I run the max payload tool is get (with a Blank Verbatim in the drive)

Scanning: G:\ [HP DVD Writer 1260vAH24]
CDB failed
L0: 0x8682
L0: 0x86DD
L1: 0x86D9
L1: 0x86E9
L1: 0x881D
Patching: .......................
BurnerMAX IS enabled !
Free Space: 8,739,897,920

What does 'CDB failed' mean?

I've tried burning 2 backups now and they just get 'Mixed Media Disc' in my xbox.

I have enabled Force Hyper Tuning, Online Hyper Tuning, OverSpeed and Smart Burn. Ticked OPC and set my buffer to 512.

Any ideas?
 

Nadles

VIP Member
Jun 2, 2013
245
0
Virginia Beach
You need to create a .dvd file. You can use ABGX to create it. It is an option listed under the first or last page. I don't have my laptop by me.

You select the .dvd file in IMGburn and burn it that way.

It appears the Payload tool is functioning correctly.
 
You need to create a .dvd file. You can use ABGX to create it. It is an option listed under the first or last page. I don't have my laptop by me.

You select the .dvd file in IMGburn and burn it that way.

It appears the Payload tool is functioning correctly.
Yes, I have burnt games plenty of times. I had a ASUS cross flashed to a iHAS but stopped playing xbox and sold the drive.

I ran the burnt disc through ABGX and that came out green too, but Xbox just gives me Mixed Media Disc (other XDG3 discs I've burnt in the past work)

I don't think the 'CDB failed' should be there, any idea what it means?
 

Nadles

VIP Member
Jun 2, 2013
245
0
Virginia Beach
It means the device failed to respond correctly. Normally if people receive it, it says "Burnermax Not Enabled, Yet."

It appeared to work correctly. If it did not it wouldn't show 8.7g of free space.

So you are burning Via Verbatim Disks and .Dvd file and not .Iso?
 
It means the device failed to respond correctly. Normally if people receive it, it says "Burnermax Not Enabled, Yet."

It appeared to work correctly. If it did not it wouldn't show 8.7g of free space.

So you are burning Via Verbatim Disks and .Dvd file and not .Iso?
Yep, .dvd file. I get no errors during the burn process, buffer doesn't drop or anything like that.
 
That's good. I would restart everything and try to run BurnerMax again.

What revision is it also? I was assuming it is the correct Revision but I have to ask.

Did you cross flash it?
http://www.youtube.com/watch?v=wJKOZxx5cgc
It's a revision C, so can't be cross flashed. I just tried the Max Payload tool on a Windows 7 laptop on the same drive and I don't get a CDB failed error, must be a Windows 8 problem. But surely, if the free space is correct it would still burn properly?

Must have been my USB Pro causing the CDB error, I'll try 1 final burn again (with a SATA to USB Cable) before I destroy the drive in anger :p
 
Last edited:

Nadles

VIP Member
Jun 2, 2013
245
0
Virginia Beach
If you don't get the Error and you have the free space. It has to be how it's being burnt.

For sh*ts and giggles I would try on a Windows 7 machine if you have access to one.

I honestly don't see why it wouldn't work unless you're getting some other error.

The only thing it sounds like to me is it burnt the ISO to the disk which made it Mixed Media.

I'd try again and just make sure, run it through ABGX and make another .DVD and try burning that again. It should be fine.
 
Nope, get Unrecognised Disc now :( here's my burn log.


Code:
I 12:20:51 ImgBurn Version 2.5.8.0 started!I 12:20:51 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 12:20:51 Total Physical Memory: 8,281,332 KiB  -  Available: 6,486,320 KiB
I 12:20:51 Initialising SPTI...
I 12:20:51 Searching for SCSI / ATAPI devices...
I 12:20:51 -> Drive 1 - Info: HP DVD Writer 1260v AH24 (G:) (USB 2.0)
I 12:20:51 -> Drive 2 - Info: HL-DT-ST DVDRWBD CA40N A102 (E:) (SATA)
I 12:20:51 Found 1 DVD±RW/RAM and 1 BD-ROM XL/DVD±RW!
I 12:21:43 Operation Started!
I 12:21:43 Source File: C:\Users\Liam\Documents\Backups\BO2.dvd
I 12:21:43 Source File Sectors: 4,267,015 (MODE1/2048)
I 12:21:43 Source File Size: 8,738,846,720 bytes
I 12:21:43 Source File Volume Identifier: DVD_ROM
I 12:21:43 Source File Volume Set Identifier: b4b08000MS UDFBridge
I 12:21:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 12:21:43 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 12:21:43 Source File File System(s): ISO9660, UDF (1.50)
I 12:21:43 Destination Device: [0:0:0] HP DVD Writer 1260v AH24 (G:) (USB)
I 12:21:43 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 12:21:43 Destination Media Supported Write Speeds: 4x, 6x, 8x
I 12:21:43 Destination Media Sectors: 4,267,040
I 12:21:43 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)
I 12:21:43 Write Mode: DVD
I 12:21:43 Write Type: DAO
I 12:21:43 Write Speed: 4x
I 12:21:43 DVD+R DL Reserve Track: No
I 12:21:43 Link Size: Auto
I 12:21:43 Lock Volume: Yes
I 12:21:43 Test Mode: No
I 12:21:43 OPC: No
I 12:21:43 BURN-Proof: Enabled
I 12:21:43 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 12:21:43 Optimal L0 Data Zone Capacity: 2,133,520
I 12:21:43 Optimal L0 Data Zone Method: Copied From Original Disc
I 12:22:26 Set L0 Data Zone Capacity Succeeded!
I 12:22:26 L0 Data Zone Capacity - Effective: 2,133,520
I 12:22:27 Filling Buffer... (99 MiB)
I 12:22:27 Writing LeadIn...
I 12:22:29 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 12:22:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 12:22:29 Writing Layer 0... (LBA: 0 - 2133519)
I 12:35:29 Writing Layer 1... (LBA: 2133520 - 4267014)
I 12:48:43 Synchronising Cache...
I 12:48:49 Closing Track...
I 12:48:50 Finalising Disc...
I 12:49:09 Exporting Graph Data...
I 12:49:09 Graph Data File: C:\Users\Liam\AppData\Roaming\ImgBurn\Graph Data Files\HP_DVD_Writer_1260v_AH24_30-AUGUST-2013_12-21_MKM-003-00_4x.ibg
I 12:49:09 Export Successfully Completed!
I 12:49:09 Operation Successfully Completed! - Duration: 00:27:26
I 12:49:09 Average Write Rate: 5,425 KiB/s (4.0x) - Maximum Write Rate: 5,505 KiB/s (4.1x)
I 12:55:47 Close Request Acknowledged
I 12:55:47 Closing Down...
I 12:55:47 Shutting down SPTI...
I 12:55:47 ImgBurn closed!
 
Last edited:

Nadles

VIP Member
Jun 2, 2013
245
0
Virginia Beach
When its in your computer what does it do? It's just not recognized in the Xbox?

If you have a Windows 7 laptop and didnt get CDB error with that on BurnerMax, why did you use the Windows 8 to burn it again? Did you get CDB failed again?
 
Last edited:
Ok, I tried a different ISO this time, that burnt normal and showed up in the xbox. I decided installing the disc would be the best way to check for a successful burn and hey presto, installed 100%. Can't believe I wasted 4 discs on 1 ISO and never tested a different ISO sooner. I thought with ABGX giving me the thumbs up it'd be fine. Could the first ISO have old topology data or something?

At least my burner works as it should, always good to know.

If you have a Windows 7 laptop and didnt get CDB error with that on BurnerMax, why did you use the Windows 8 to burn it again? Did you get CDB failed again?


The CDB error was caused by my USB Pro, I was using that to connect it. I have an Alienware X51 which doesn't have space for a full DVD drive so I have to use external wires, I have connected it internally for now using a spare SATA port.
 
Last edited:

RhoTrux64

VIP Member
Jun 22, 2004
591
0
According to ImgBurn, the burner ID is 1260v, not i. Enabled payload doesn't mean capable. There is a long list of enabled burners, but only a handful have proven to burn successful XGD3 backups.

Try verifying the burn with ImgBurn or check the backup with abgx. I'm sure a Nero Discspeed scan will also show poor performance.

Sent from my Asus Transformer Pad using freakin' Tapatalk 4
 
Last edited:
According to ImgBurn, the burner ID is 1260v, not i. Enabled payload doesn't mean capable. There is a long list of enabled burners, but only a handful have proven to burn successful XGD3 backups.

Try verifying the burn with ImgBurn or check the backup with abgx. I'm sure a Nero Discspeed scan will also show poor performance.

Sent from my Asus Transformer Pad using freakin' Tapatalk 4
That's just the revision of the drive, there's 1260v, w etc. The model itself is a 1260i.

I have burnt an XDG3 Game and it worked perfect, installed 100% so it must be compatible, I'm not bothered about kprobe results, If I get banned (which I won't) then I'll just RGH the console :p
 

Nadles

VIP Member
Jun 2, 2013
245
0
Virginia Beach
According to ImgBurn, the burner ID is 1260v, not i. Enabled payload doesn't mean capable. There is a long list of enabled burners, but only a handful have proven to burn successful XGD3 backups.

Try verifying the burn with ImgBurn or check the backup with abgx. I'm sure a Nero Discspeed scan will also show poor performance.

Sent from my Asus Transformer Pad using freakin' Tapatalk 4
Yeah what he said ^^ I just saw since I just logged on my laptop instead of phone that you are using 1260V the USB 2.0 Model. That's different that 1260I. I'm glad it worked out for you with another ISO but still something is up. Normally CDB Failure is listed for a Non-Compatible Model. I've seen many threads of people trying to BurnerMax a Rev D IHas and it's not going to work. I haven't seen the 1260V listed anywhere as working or not with the BurnerMax Compatibility List.

Hopefully it does work out for you though. Glad it worked.
 
Yeah what he said ^^ I just saw since I just logged on my laptop instead of phone that you are using 1260V the USB 2.0 Model. That's different that 1260I. I'm glad it worked out for you with another ISO but still something is up. Normally CDB Failure is listed for a Non-Compatible Model. I've seen many threads of people trying to BurnerMax a Rev D IHas and it's not going to work. I haven't seen the 1260V listed anywhere as working or not with the BurnerMax Compatibility List.

Hopefully it does work out for you though. Glad it worked.
I re-ripped Black Ops 2 but it still doesn't work in my Xbox, I'm so confused. My rip of SR4 worked perfect.

Is there a known problem with BO2 or something? It verified 100% in IMGBurn.

Also.




Verify log

Code:
I 18:51:06 ImgBurn Version 2.5.8.0 started!I 18:51:06 Microsoft Windows 8 Core x64 Edition (6.2, Build 9200)
I 18:51:06 Total Physical Memory: 8,281,332 KiB  -  Available: 6,584,816 KiB
I 18:51:06 Initialising SPTI...
I 18:51:06 Searching for SCSI / ATAPI devices...
I 18:51:06 -> Drive 1 - Info: HL-DT-ST DVDRWBD CA40N A102 (E:) (SATA)
I 18:51:06 -> Drive 2 - Info: HP DVD Writer 1260v AH24 (F:) (USB 2.0)
I 18:51:06 Found 1 DVD±RW/RAM and 1 BD-ROM XL/DVD±RW!
I 18:51:17 Operation Started!
I 18:51:17 Source Device: [0:0:0] HP DVD Writer 1260v AH24 (F:) (USB)
I 18:51:17 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 18:51:17 Source Media Supported Read Speeds: 2.4x, 4x, 6x, 8x, 12x
I 18:51:17 Source Media Supported Write Speeds: 4x, 6x, 8x, 12x, 16x
I 18:51:17 Source Media Sectors: 4,267,024 (Track Path: OTP - L0: 2,133,520 - L1: 2,133,504)
I 18:51:17 Source Media Size: 8,738,865,152 bytes
I 18:51:17 Image File: C:\Users\Liam\Documents\Downloads\complete\imars-blkops2\imars-blkops2.dvd
I 18:51:17 Image File Sectors: 4,267,015 (MODE1/2048)
I 18:51:17 Image File Size: 8,738,846,720 bytes
I 18:51:17 Image File Volume Identifier: DVD_ROM
I 18:51:17 Image File Volume Set Identifier: b4b08000MS UDFBridge
I 18:51:17 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 18:51:17 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 18:51:17 Image File File System(s): ISO9660, UDF (1.50)
I 18:51:17 Read Speed (Data/Audio): MAX / MAX
I 18:51:18 Read Speed - Effective: 4.8x - 12x, 12x - 4.8x
I 18:51:18 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 18:51:18 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 18:51:18 Verifying Layer 0... (LBA: 0 - 2133519)
I 18:57:29 Verifying Layer 1... (LBA: 2133520 - 4267014)
I 19:03:37 Exporting Graph Data...
I 19:03:37 Graph Data File: C:\Users\Liam\AppData\Roaming\ImgBurn\Graph Data Files\HP_DVD_Writer_1260v_AH24_30-AUGUST-2013_18-51_MKM-003-00.ibg
I 19:03:37 Export Successfully Completed!
I 19:03:37 Operation Successfully Completed! - Duration: 00:12:19
I 19:03:37 Average Verify Rate: 11,563 KiB/s (8.5x) - Maximum Verify Rate: 16,487 KiB/s (12.2x)
 
Last edited:
Status
Not open for further replies.