Messed up Live config settings

ivan300

Noob Account
Mar 23, 2005
6
0
I was playing with the settings because i was having problems with my hdtv and some of the apps.
I was careless and i enabled the vga patch,doh. then i rebooted and i had no video. i tried the a a 10 down a, reboot...nothing. I tried a a up up a ...nothing. Then i flashed over my first bank with the same bios...nothing. Then i flashed the second 1 meg bank and i still get nothing. please help.

I dont think the xbox is going into the live config anymore. If i press up and a it doesnt shut down :eek::eek:
 

C0Ld_BuG

VIP Member
Feb 23, 2004
463
0
Ok then...try this to reset the video.
After you think you are in config live, press 'A'.
Now press 'up' twice, then 'A'.
Now press 'left' once, then 'A'.

You could also try and erase the eeprom...
Flash 256kb bios to the x3...evox - x2 - whatever you want.
Get the x3erase.xbe off of xbins and run that on the xbox while booted with the other bios.
Reboot and switch back to X3 bios.

C0Ld_BuG
 

ivan300

Noob Account
Mar 23, 2005
6
0
I tried the x2 bios and xtender1.3. when i turn on the xbox it turns of 2 times the flashes red and green :eek:
 

ivan300

Noob Account
Mar 23, 2005
6
0
thanks for your help C0Ld_BuG. I flashed to the x3 1959 bios and it booted. then i erased the eeprom and everything is good now :D:D:D
 

ntegra67

Noob Account
Mar 31, 2005
3
0
yay i found my answer will try this later because i made the same error as you hopefully i could fix it
 

prozack666

Noob Account
Mar 24, 2005
3
0
vga patch!! sos

[font=verdana, arial, helvetica]i enabled the vga patch on my 1.6 xbox and now i cant see anything?

i have reflashed the bios but still nothing.
i dont seem to be able to get into the x3 config live so i cant turn off the feature?
i can ping the box but dont get ftp access, it just says access denied.
when i boot with chip disabled i get service required contact cust services.
i have read as much as i can and it seems that i need to restore or renew the eprom?

how can i fix this problem?
how do i wipe or reset the eprom?
is there anyway that i can make a boot disk to reset or at least give me ftp access to the box?

please help somone! i would be very gratful and your slave for life if anyone can help me fix this!

prozack.

x3, ver 1.6, 120 hdd. X3_3029
[/font]