messed up my crystal box

[aliman]

I have a Crystal Xbox v1.6a with a X3 modchip by Team Xecuter. Everything was working great up until yesterday. I was fiddeling with the video settings on the X3 dashboard, and the sceen went blue. I tryied restarting but now all I get is the XBOX boot screen then the screen goes black with the number 06 at the top left hand corner. Don't know what to do next??

 

[DJBOOBY]

unlock your hard drive

 

[aliman]

messed up

Pardon my ignorance, but how would I do that ?

 

[DJBOOBY]

if you can get into x3 bios in there or in the flashbios backup bios there are options

 

[aliman]

I think I have really messed this up. I've tried all the switch settings but can not get to the flash bios screen. I have tried pressing the power and eject button to get to the back up bios screen , when the screen comes up it overfills the screen size and does not have the lock or unlock HDD option on screen.

 

[DJBOOBY]

can you get into your bios hold white button on boot up then change chip back to factory default
http://x3.bustedchain.com/x3configlive.html#reset

 

[aliman]

can you explain in greater detail, i'm a really nooby!

 

[aliman]

progress

OK I've managed to get back to the Flash Bios screen, and a message says "unable to read HDD first sector getting partition table" is above the five options. Now I've tried using the Unlock HDD option and still keep getting error code 06 on boot up.

 

[DJBOOBY]

hold down white button on controler on boot up of xbox
then go into x3 config live option then goto reset x3 configuration to defaults
reset x3 then reboot xbox

 

[aliman]

am I booting to Flash Bios Screen or to normal xbox boot screen and holding White button, which neither seems to work.

 

[DJBOOBY]

hold down white button on controler on boot up of xbox
you are trying to boot into x3 bios just hold white button then tap xbox power button and keep holding the white button till it go into x3 bios dash

 

[aliman]

tried holding the White button down while turning ON Xbox Ten times, but still keep getting black screen with 06 in top left hand corner, after the flubber and X Xbox screen !

 

[DJBOOBY]

try holding YXBA on bootup of xbox

 

[aliman]

tried holding down all controller buttons while booting up,still getting code 06.

Also when I boot up to the Flash Bios screen I try option "load bios from/:c" but I get three error messages ; Unkown drive, Unable to get first sector, and LoadFATXCluster:Out of data while reading cluster 1
HELP.....

 

[DJBOOBY]

have you done anything else in the bios config dash other the change video settings
have you had H/D out at all if so check your conections

 

[aliman]

the only time I had HDD out was yesterday to try that HDD Swap with another Xbox I have, unsuccessfully! the connections are right and tight.

 

[DJBOOBY]

ok when you hold down white button is the switch settings set to the x3 bios bank ever on on off off off or off on off off off

it funny you having this trouble and all you did was change video setting you did not set anything else

 

[aliman]

no , did not change anything else ?