Messed up nand.bin

[Metalliogre]

Did something stupid. read my nand.bin twice from my 12625 dash, updated to 13604, and didnt read the nand.bin before i wrote a new bin. now my nand bin is a 12625 on a 13604 dash and it wont boot. Please help!

 

[Martin C]

Do you have the CPU key?

 

[Metalliogre]

Do you have the CPU key?

Yes sir. I'm using jtag tool. I tried to edit jtag tools options1.inf File to set the number to 6, there was 6 f's on line 7 in xell.

 

[Martin C]

What are you trying to build? A retail or glitches image ?


Sent from my iPad using Tapatalk.

 

[Metalliogre]

What are you trying to build? A retail or glitches image ?


Sent from my iPad using Tapatalk.

I have a coolrunner hooked up and I'm just trying to write a glitch image to get it going. Boots into xell perfectly, but since I updated the Xbox after reading the 12625 NAND.bin, I got a 12625 NAND.bin with a 13604 updated Xbox 360. All I get is black screen.

 

[Martin C]

Use multi builder and edit options.ini. Write the image back using raw flash.


Sent from my iPad using Tapatalk.

 

[Metalliogre]

Use multi builder and edit options.ini. Write the image back using raw flash.


Sent from my iPad using Tapatalk.

What all do I move over to the multibuilder folders?

 

[Martin C]

Extract and run it. It's fairly easy to navigate. There's a read me file in there too.


Sent from my iPad using Tapatalk.

 

[Metalliogre]

Got it. Thanks. What does it mean when you stick the capacitor on ground and the a point, and you get no green light at all?

 

[Martin C]

What point and what capacitor? Also what board?

 

[Metalliogre]

What point and what capacitor? Also what board?

The capacitor that comes with the coolrunner. I install it where it says to, but the green light on the coolrunner won't light until the capacitor is removed.

 

[Martin C]

Yes, what board do you have?

 

[Metalliogre]

Yes, what board do you have?

Jasper 256

 

[Martin C]

Check the following in this order.

1. Soldering.
2. Wire routing (do as per the documentation).
3. ECC write (must be +w64 or +w256)

 

[Evil0ne]

wait u did what now? ur nand is ur dash u cant havea 12611 nand and a 136* dash if ur gettin e79 can u boot xellous via eject button?

 

[Metalliogre]

Check the following in this order.

1. Soldering.
2. Wire routing (do as per the documentation).
3. ECC write (must be +w64 or +w256)

I do everything through jtag tool. My Xbox glitches, just takes too long sometimes, other times it glitches instantly. I routed wires all correctly and triple checkedy solder connections. It's just when I add that cap, it won't glitch at all.

 

[Martin C]

So when you add the cap it doesn't flash at all?

try adding a 680pF cap IN LINE with CPU_RST.

 

[Metalliogre]

So when you add the cap it doesn't flash at all?

try adding a 680pF cap IN LINE with CPU_RST.

Splice the CPU_RST and put the cap between?

 

[Martin C]

lol no!

solder one leg to pad D and the other leg to the blue wire!

 

[Metalliogre]

lol no!

solder one leg to pad D and the other leg to the blue wire!

Ha ha. K. I seen you said in line and though something different.