Missing D0 (gray) wire in kit?
- Thread starter silfreed
- Start date
It should be bundled in the group of wires (wire install loom, switch bank wire, 5v link wire, reset + eject wire and the d0 wire) or did you not get that?
Nope; I did not get that. I wasn't sure if it was supposed to be in that bundle or not (difficult to see in the picture). Guess I'm stuck now until I write system-mods, eh?
-Doug
-Doug
I did get wires; just not the d0/lan/hd wires. I wouldn't mind making my own set except that the header used for those particular ones isn't very common (I know I don't have it lying around).
Appreciate the help! I just wanted to make sure there wasn't something obviuos I was missing.
-Doug
Appreciate the help! I just wanted to make sure there wasn't something obviuos I was missing.
-Doug
Yeah, I can do that to; any idea which pin to solder onto for each the d0,lan, and hd on the xecuter 3? For reference, lets both use this image:
-Doug
-Doug
This picture should help:
http://www.baldbouncer.btinternet.co.uk/xecuter3bb.jpg
It looks as though the d0 wire is on the left
http://www.baldbouncer.btinternet.co.uk/xecuter3bb.jpg
It looks as though the d0 wire is on the left
labelling pin one as the one farthes to the right on your picture it would go like this
pin1=lan LED
pin2=HD LED
pind3=d0
hope this helps
pin1=lan LED
pin2=HD LED
pind3=d0
hope this helps