Hi Guys,
i have the 1.1 xbox with 2.6 CE lite modchip.. ive followed this guide http://www.teamxecuter.com/x3/tutorials/x3pin1015.htm?CMSSESSID=34dd53b24e456147187e8ee1e85c6ab0 (X3/X2.6 v1.0-v1.5 Install) but i dont have part 3 (eject adapter).. so i skipped the install of that and the red wire, and the xbox switches on and off 3 times then frags... nothing on screen at any time.. if chip is disabled xbox boots without problems..
Is part 3 definatly required for the Lite chip or is soldering the problem? we used the pins option instead of soldering each wire
Blue light appears on modchip, and its off when chip is disabled. Also all the leds on the ext switch seem to work fine when changing the dip switches..
-using stock a/v cables
i have the 1.1 xbox with 2.6 CE lite modchip.. ive followed this guide http://www.teamxecuter.com/x3/tutorials/x3pin1015.htm?CMSSESSID=34dd53b24e456147187e8ee1e85c6ab0 (X3/X2.6 v1.0-v1.5 Install) but i dont have part 3 (eject adapter).. so i skipped the install of that and the red wire, and the xbox switches on and off 3 times then frags... nothing on screen at any time.. if chip is disabled xbox boots without problems..
Is part 3 definatly required for the Lite chip or is soldering the problem? we used the pins option instead of soldering each wire
Blue light appears on modchip, and its off when chip is disabled. Also all the leds on the ext switch seem to work fine when changing the dip switches..
-using stock a/v cables