missing qsb, should i proceed?

F

fuseless

Noob Account
Oct 11, 2015
6
0
Dears,

I have ordered parts to do a first time R-JTAG to my jasper, dash 16537.

I got the CR4 XL, the JR2 programmer, and the QSB v3 kit.

I started some tutorials online and wanted to begin modding when I saw they use an additional qsb called Alt JTAG v2 or so, which i don't have.

I just have the 2 main QSB v3 on top, and don't have the bottom one in the pic http://team-xecuter.com/cr4/CR4_PHAT_KIT.png

I would appreciate your feedback, on whether I can go on without it, and in this case which guide i need to follow, or whether I need to order it.

Thank you and Best Regards.

Alain.
 
Titanfreak736

Titanfreak736

BANNED
Oct 19, 2014
194
0
yea you can go without just rgh2 now though no r-jtag hmm weird it should have come with the rjtag if bought off modchip central where did you buy them
and dont mess with quick disconect nand qsb they suck in my opinion
 
F

fuseless

Noob Account
Oct 11, 2015
6
0
Titanfreak736 said:
yea you can go without just rgh2 now though no r-jtag hmm weird it should have come with the rjtag if bought off modchip central where did you buy them
and dont mess with quick disconect nand qsb they suck in my opinion
Click to expand...
Not through modchipcentral or any other official website due to difficulties in shipping/payment options and cost to Lebanon (Placed the order on one of the recommended websites, cost me twice the parts price for shipping, and order didn't go through at the end as they said they cannot use credit cards from my country). SO I had to improvise :) parts look good though but no alt jtag qsb.

rgh2 is different wiring right? so when i get the alt jtag qsb can i easily move back to rjtag??

Thanks.
 
GeekHeat

GeekHeat

VIP Member
Jun 28, 2013
1,805
88
lancashire
Just wire up using rgh2+ method. It works really well on Jasper's.
So in my opinion no need for the R-jtag+ method.
 
F

fuseless

Noob Account
Oct 11, 2015
6
0
Bong420 said:
I replied to that thread here a few weeks back

http://team-xecuter.com/forums/threads/148878-CR4-R-Jtag-Install-Diagram-(Wires-Only)
Click to expand...
Hi,

Unfortunately I am a beginner with this.

Not a complete beginner with soldering (i fix stuff at home) nor with xbox stuff (I have modded my disk using connectivity to pc sata with jungleflasher) but completely new to this.

If you know for a fact that I can do it without the Alt JTAG QSB ( i have the other 2) then care to help me a bit? I would really appreciate it. I am unfortunately unable to grasp it all by looking at the link you have provided.

Thanks.
 
F

fuseless

Noob Account
Oct 11, 2015
6
0
keil423 said:
You can also do direct soldering in place of the alt qsb. It's just a couple of diodes and wires.
Coolshrimp has a guide on his site. It's floating around the net a few places.
Click to expand...
Hi thanks, will this cause any unstability to the system or make me lose any feature?
 
GeekHeat

GeekHeat

VIP Member
Jun 28, 2013
1,805
88
lancashire
fuseless said:
Hi,

Unfortunately I am a beginner with this.

Not a complete beginner with soldering (i fix stuff at home) nor with xbox stuff (I have modded my disk using connectivity to pc sata with jungleflasher) but completely new to this.

If you know for a fact that I can do it without the Alt JTAG QSB ( i have the other 2) then care to help me a bit? I would really appreciate it. I am unfortunately unable to grasp it all by looking at the link you have provided.

Thanks.
Click to expand...
http://team-xecuter.com/forums/threads/148002-CR4-XL-PHAT-Opus-Falcon-Jasper-Install-Guide-(RGH2-)
 
You must log in or register to reply here.