Missing x2config.ini?

[dookie320]

[font=verdana, arial, helvetica]Hello all,

Today my friend installed the x2.6CE chip and flashed using x2_5028. I created a bootdisk for unleashx dashboard on a dvd-r and it works. I moved the default.xbe and config.xml to the c drive. When rebooting, it loads teh default MS dashboard. I did some reading and have an understanding that i have to modify the [/font][font=verdana, arial, helvetica]x2config.ini file to specify the path to the unleashx dash. However, I am unable to find it in the c, e, f drives. Should this be there? I am unable to reflash the bios with 5035 because bank 1 shows the "xecuter 2 config live loading..." and bank 2 does nothing at all. I am unable to get to the flashbios 3.0.1. What options do I have?[/font]
[font=verdana, arial, helvetica]
x2.6CE
1.6 version xbox
[/font][font=verdana, arial, helvetica]x2_5028 bios
OEM hard drive (i plan to upgrade at a later time)
[/font][font=verdana, arial, helvetica][/font]

 

[DJBOOBY]

a progremer or hotswap

 

[dookie320]

sad to hear, does [font=verdana, arial, helvetica][font=verdana, arial, helvetica]x2_5028 not support the [/font][/font][font=verdana, arial, helvetica][font=verdana, arial, helvetica]x2config.ini file?
[/font][/font]

 

[DJBOOBY]

if you can get flashx2 and try that to flash the bios too bank 2 flash bios or better flashbios with that

 

[dookie320]

Would I be ok if I found the correct ini file? I have been lookign on xbins but cant find any bios version x2 5028 that my friend used. =(

 

[DJBOOBY]

mate its there got it again yesterday