ANSWERED Mod Advice

[CircuitBurner64]

Hello,

I have a 360 with a trinity MB.. Some time back I had planned to mod it with: CR3 Pro v1.0S Full Post Ultimate Bundle. Which has the CR3 Pro, JR v2, and the QSBs needed for a Trinity. Then add a Demon. At the time I was going to get all my stuff from xconsoles but they seem to have stopped selling that bundle. I have also looked at modchip central. but they don't carry the bundle.

The more I looked around for the original bundle the more I noticed alot had changed sense I planned the original mods. And with all the new mod boards out there I'm totally lost..

The end state for my 360 is to mod it for my Rocksmith 2014 game and having the ability to add custom DLC songs as i make them. I also want to use a non USB 1TB/2TB HDD as apposed to the 250GB that's in it now.. Then I'll have the room to add all the songs I want to play.

This is also going into a HTPC case so having room isn't an issue..

Thanks in advance for your assistance..
Kevin

 

[playingmax]

If u don't mind shipping I could do the work for u.

Sent from my HTCONE using Tapatalk

 

[CircuitBurner64]

Thanks for the offer. But half the fun of all this is doing the work and the satisfaction that you didn't blow it up. . Actually I can do the work. That doesn't bother me at all.. I just need to know what components I need to do it seeing how the hardware has changed so much in the past 2 years...

 

[[email protected]]

All u would need is jr programmer, cr4,demon and qsbs if u want them but they're not needed

 

[[email protected]]

Other than the ones you needed for trinity for cr4 n demon

 

[GeekHeat]

if this is the only rgh that u will be doing and go dual nand then u only need cr4xl and demon. The demon will read and write the nand for u. if u are planning on doing multiple install then u will need something like a jr programmer.

 

[[email protected]]

if this is the only rgh that u will be doing and go dual nand then u only need cr4xl and demon. The demon will read and write the nand for u. if u are planning on doing multiple install then u will need something like a jr programmer.

That's right, i always forget about the demon being able to read n write

 

[CircuitBurner64]

Thanks so much for all your input.. I have been wanting to get back to this project for a while now..
Ok.. So I'm Straight on the needed hardware list..
I found this at Modchip Central..

$34.95 Xecuter CR4 XL for 360 SLIM & PHAT! RGH2+/RJTAG+/JTAG $39.95 Xecuter DemoN (2 boards for dual Nand) $109.95 Xecuter X360USB Pro V2 Ultimate Bundle Having trouble locating the Qsbs.. I thought I found one ProgSkeet V1.21, but it states it "No longer supporting NAND/NOR CLIP tools". So I don't know if that will work or not.. Any other recommendations for the Qsbs? And a source? I was als0 looking at the X360Key But I'm not sure it is needed.. Thx..

 

[ramsfan3068]

That's right, i always forget about the demon being able to read n write

How do you forget that. That's the best part. Speedy NAND read and writes...

 

[[email protected]]

Had a temporary loss of brain function lol

 

[[email protected]]

Thanks so much for all your input.. I have been wanting to get back to this project for a while now..
Ok.. So I'm Straight on the needed hardware list..
I found this at Modchip Central..

$34.95 Xecuter CR4 XL for 360 SLIM & PHAT! RGH2+/RJTAG+/JTAG $39.95 Xecuter DemoN (2 boards for dual Nand) $109.95 Xecuter X360USB Pro V2 Ultimate Bundle Having trouble locating the Qsbs.. I thought I found one ProgSkeet V1.21, but it states it "No longer supporting NAND/NOR CLIP tools". So I don't know if that will work or not.. Any other recommendations for the Qsbs? And a source? I was als0 looking at the X360Key But I'm not sure it is needed.. Thx..

The only chips needed are the cr4 the trinity qsb which is included in package and the demon

 

[CircuitBurner64]

Well crap.... they only have a DemoN Slim for Corona not the Trinity... Bummer!!! ?

 

[alexander_1333]

DemoN Slim for Corona will also work on a Trinity.BTW you need only 1 DemoN and CR4 XL.

 

[CircuitBurner64]

Cool!!!! I'll go get those right now.. good thing I asked all this in the "noob" area. Lol

 

[ramsfan3068]

Cool!!!! I'll go get those right now.. good thing I asked all this in the "noob" area. Lol

DemoN Slim for Corona will also work on a Trinity.BTW you need only 1 DemoN and CR4 XL.

Read it earlier today, the slim for corona is actually a phat demon with a corona to phat QSB as they are out of slim demon's. Still possible to install, but will need to do direct wire.