ShagNastY
VIP Member
Mods Repairs & RGH Jasper & Slim Consoles For Sale
- Thread starter nofeloniesyet
- Start date
- Mar 1, 2010
- 3,346
- 128
OK this is the third Console i Have purchased from Mr no felonies in the past 2 years. all had very fast shipping, and worked awesome. i know this is my only post but just wanted to give a shout out. best customer service in the business . You will be my go to every time. Thank you!
Intox
Senior Member
thanks man.i seem to be blocked from my home pcs to this site,so if anyone needs me email me at [email protected]
would like to let everyone know i am now taking in blue light of death (i guess were callin it this time round,lol) playstation 4 consoles for reball.contact me for info! will be adding pics later on in the week. if the light stays blue and never goes white theres a good chance the apu needs reballing.
pic of ps4 motherboard before rework.
nice clean chip lift.
apu pulled but not cleaned yet.
pic of top of apu.
apu cleaned and ready for solder balls.
board cleaned and ready for reballed chip.
waiting on .55 solder balls.will post more pics once i have them.
Last edited:
ultimate360
VIP Member
Dang, ps4s already dying? That's sad they are only lasting a year on those apu's
ps4 are having more issues that xbox one. ive seen a lot of blod issues. i havnt gotten one yet to try out but might order one of ebay to try and fix
blod in most cases needs apu reballed.make sure you have .55mm balls.i overlooked that myself and im now stuck on this one,got few more sittin here to do as well.luckily xdk has some .5mm that should work till my .55 get here,so more pics later on in week will be added to that post ^^^^
finally got round to adding the top elstein heater plate also.so now have full set of elstein plates.lemme tell you,those plates run almost 400 a set for my scotle,but was welllll worth it
Last edited:
ultimate360
VIP Member
Nice! Still running the stock plates on my Bauer v5, perfectly even heating still after about 1 and a half years of hard use. I am definetely going to grab some ps4s now, and new balls lol
i love my scotle ir6000 , only had one issue and that was the top ceramic heater went bad on me , but thats was a easy replacement and i order a extra just incase.
eh,i looked at that when i got both my machines.it just seemed like the bottom heater was just too small for me.but i rework everything from psp to laptops. seemed to me like the ir6000 would struggle with the bigger stuff i work on.so i went with the achi ir pro sc v3 for my first machine.then it burned out in less than a year.then i got this scotle ir pro sc v4.looooooovin it cause its like the achi,but much better quality. you should see the inside under bottom plates that achi,its a mess,looks like a kindergardner put it together and wired it up,in fact,heres a pic from when i put the bottom elstein plates in it and added better opto ssr's.
the scotle is muchhhhh better/cleaner inside.
Last edited:
BrockThunderjam
VIP Member
- Jun 25, 2013
- 1,503
- 88
DVD bezels received. Didn't expect two, but much appreciated. Thanks again and as always a pleasure to trade with.
Intox
Senior Member
Nofeloniesyet is very thoughtful and generous...I sent him two 360 chassis w/ MOBO for RGH and he shipped each one back in a case at no extra charge.
Thank's for the 2 pl2303 IC's plus the extra one. Hopefully I only need to use one. Also I have a falcon with cr4 xl and demon that has a x-clamp fix. How much to reball it and add back the x clamp's?
Re: Mods Repairs & RGH Jasper & Slim Consoles For Sale
update on the post above about ps4 reballing!
chip in jig with balls on it.
chip balled and ready to reattatch.
another picture of balled apu for ps4.
white light!!!! (was previously blue light and nothing else)
BAM!
so blue light of death def= apu reball.
update on the post above about ps4 reballing!
chip in jig with balls on it.
chip balled and ready to reattatch.
another picture of balled apu for ps4.
white light!!!! (was previously blue light and nothing else)
BAM!
so blue light of death def= apu reball.
Just got my Jasper back from nofelonies, and I have to say it's working great! He was very friendly and let me know what was happening every step of the way, and even payed a couple of dollars from his own pocket to ship my xbox back to me with the original box I sent it in (super nice! thank you!)
A couple of little things I noticed:
Inner platform of console box had a slight rip (honestly no big deal at all and probably happened during shipping)
DVD drive is a little louder than I remember, but maybe that's just me
Console and box smell semi-heavily of smoke. I don't mind too much, but it's noticeable enough and a slight warning/heads-up to others
Otherwise, I'm thoroughly impressed with nofelonies and his work. I never expected my console to work after all the problems I had with it during and post the R-JTAG (especially since I caused half of them by prematurely or incorrectly taking stuff apart), but he was able to get it to work again. Now,I have one awesome present for my little brother for his birthday in a couple of weeks!
A couple of little things I noticed:
Inner platform of console box had a slight rip (honestly no big deal at all and probably happened during shipping)
DVD drive is a little louder than I remember, but maybe that's just me
Console and box smell semi-heavily of smoke. I don't mind too much, but it's noticeable enough and a slight warning/heads-up to others
Otherwise, I'm thoroughly impressed with nofelonies and his work. I never expected my console to work after all the problems I had with it during and post the R-JTAG (especially since I caused half of them by prematurely or incorrectly taking stuff apart), but he was able to get it to work again. Now,I have one awesome present for my little brother for his birthday in a couple of weeks!
yea we smoke in the house (if you cant tell) and that box was here a lilllll longer than it shoulda been,sorry bout that.