Moved IHAS B

[Neo213]

I recently upgraded to a new desktop and moved my flashed IHAS drive from the old one. My burns are no longer working with the recommended settings in ImgBurn. The drive is recognized in Device manager.
Should I reflash the drive? There were no original drivers to install as I recall. Any suggestions?
I tried 3 Verbatims 2 failed on Verification and 1 failed about 10% complete

 

[frayed]

you will need to experiment to find out what settings work best for your new desktop as no setup is the same, what worked for your last desktop will most likely not work for your new one

 

[Astromine]

What type of Verbatim disc are you using? Also, what are your EEPROM settings?

 

[TechTona]

Just make sure you enable smartburn and play around with the settings till you get a excellent burn in your computer[Configurations differ from person to person]. What works for others may not work for you.

 

[Neo213]

I'm not sure the Verbatim ID I threw the package away
Will KProbe identify that ?

EEPROM Settings
Smartburn = Enabled
Force Hyper Tuning = Enabled
Online Hyper Tuning = Disabled
Over Speed Writing = Disabled
Cleared OPC History = before burn

I'll try another and then try hyper tuning

 

[Neo213]

MMK03 says Imgburn

 

[TechTona]

Make sure you set book type to DVD-ROM