MS25 with green flashing light after fixed 3RLOD!

[none123]

My x360 has a Sammy MS25 and was flashed awhile ago. Last week it suffered a 3RLOD error. I have done the xclamp replacement and finally got it going this afternoon with the proper mobo support. Everything with the DVDROM drive was fine until right before I got a good solid fix on thr 3RLOD. I powered up and it booted then overheated (as I expected), spit the DVDROM tray open, and powered off. So I manually closed the tray since I needed to finish "fixing" the cooling. All is fixed aside from the constant flashing green light and the DVDROM tray will not opening. I also booted the x360 without the DVDROM drive attached and I still get a flashing green light. The only thing I can find like this is a bad flash issue. I wouldn't think its a bad flash due to it having the same issue without the DVDROM connected.

Any ideas?

Thanks!

 

[mlpokni]

make sure the dvd tray is plug d in right

 

[none123]

I verified all my connections last night. After some generic testing, I determined that the dashboard knows when the DVDROM tray is opened or closed if I manually open or close it. Don't know if that can rule out anything. I still haven't tried to re-flashed it because I'm not yet convinced that is the issue plus it is an ordeal to pull out my psu and video cables...