msdash boots not flashbios screen

[nikklez]

hey everyone, i just needed a little help on a minor problem. i installed the x3ce on a 1.6 xbox. when first installed, the modchip lights up blue but instead of the flashbios screen booting up, i get the msdash booting up. also the external switch doesnt light up either. other than those 2, thats about it. everything is fine. advice is highly appreciated. thanks a lot guys.

 

[C0Ld_BuG]

Sloppy solder job...check your solder points again and get a voltmeter if you can...check voltages.

C0Ld_BuG

 

[__M__]

Did you solder the D0 (grey wire) to the LPC Rebuild Module?

 

[nikklez]

yeah, i soldered the d0 to the lpc rebuild module. do you think i should just resolder it all over again?

 

[jsun]

yea get some solder braid and some flux if you dont have. best of luck

 

[nikklez]

yeah..ill let you guys know if it worked or not.. should i still use the lpc board or just do it with the wires?

 

[nikklez]

hey guys i got everything to work fine now...it turned out that i didnt have to resolder the whole thing all over again...i just didnt have a good connection between pin 9 and 15...which is the 3.3v. i touched it up...and everything bootered perfectly...thanks guys for at least hearing me out...=)