Multibuilder can't find CPU key

[ahmedss79]

Hi,
I've RGH my falcon successfully.

but I used NAND healer to install the NAND, because I tried using multibuilder to create the image but it give the CPU key missing error even though I installed it(cpukey.txt) where I suppose to ( data\my360) folder
I also removed the cpukey word from the file , leaving only the key in the txt file





Sent from my iPhone using Tapatalk

 

[optantic]

check the cpu key with your nand using Jtagtool and make sure it matches

 

[Martin C]

what's the exact error message?

 

[ahmedss79]

what's the exact error message?

Cpukey.txt is missing


Sent from my iPhone using Tapatalk

 

[ahmedss79]

check the cpu key with your nand using Jtagtool and make sure it matches

Ok I'll do it when I get home



Sent from my iPhone using Tapatalk

 

[Martin C]

Cpukey.txt is missing


Sent from my iPhone using Tapatalk

So you don't have a file called cpukey.txt in my360 then.

Any chance you're not hiding extensions for known file types and have it named as cpukey.txt.txt by mistake?

 

[ahmedss79]

So you don't have a file called cpukey.txt in my360 then.

Any chance you're not hiding extensions for known file types and have it named as cpukey.txt.txt by mistake?

I have the file and it's named cpukey , the file appears as ( cpukey.txt)


Sent from my iPhone using Tapatalk

 

[Martin C]

go to command line and type 'type cpukey.txt'.

let me know if you see what you expect to.

 

[ahmedss79]

go to command line and type 'type cpukey.txt'.

let me know if you see what you expect to.

I just did it and it gave my CPU key


Sent from my iPhone using Tapatalk

 

[Martin C]

can you post a screenshot of the /data/my360 folder which shows it there?

 

[ahmedss79]

can you post a screenshot of the /data/my360 folder which shows it there?

here it is

 

[esbmaepo]

here it is

Try run multibuilder with administrator rights. See if that helps.

 

[Krafter]

Did you try the suggestion in post #2? This would tell you if you are using the correct key.

 

[ahmedss79]

I just extracted nandpro3.0 in the c:\nandpro folder again and used multi builder and it worked


Sent from my iPhone using Tapatalk

 

[Martin C]

multi_builder doesn't even need nandpro, so something else going on here.

A copy of the log would have been useful when it was failing!

 

[ahmedss79]

multi_builder doesn't even need nandpro, so something else going on here.

A copy of the log would have been useful when it was failing!

I know , what I forgot to mention was that I also extracted multi builder again and it worked
And thanks a lot you guys for all your replies



Sent from my iPhone using Tapatalk

 

[Martin C]

ah ok - cool.