MUST READ FOR PEOPLE HAVING PROBLEMS WITH MKM001

kelladros

Noob Account
Nov 1, 2011
3
0
Thanks, enabling everything and burning 4x made my discs perfect now. I wish I had done it sooner and saved the 5 disc I wasted :)
 

fight2fight

Full Member
Jul 19, 2010
81
0
Australia
i have also tried this method, but did not work and i have also tried in safe mode did not work came out worse in safe mode then my others. -_- so frustrating
 

fight2fight

Full Member
Jul 19, 2010
81
0
Australia
^^ i have a iHAS124 B just recently bought ??

the other burner i use for XGD2 games is an Asus, but thats not going to work obviously for the new XGD3 games. so in other words i need to get another drive ??

i don't see why i need another drive if i recently bought one.

anyways thanks for your help. :D
 

Burt Budley

Noob Account
Nov 2, 2011
1
0
Thankyou. Was about to give up on the verb 001's until I saw this thread. I couldn't get a decent kprobe result until I enabled all settings and burned at 4x.

1st Test
Burn Speed-2.4x
Smartburn-On
Everything else-Off

2nd Test
Burn Speed-4x
Smartburn-On
HT-On
OHT-On
Overspeed-On
OPC-On

2nd test was way better and within guidelines. Thankyou OP.:D
 

ghostzleader

Noob Account
May 20, 2011
2
0
first test was 2.4 speed
opc unticked
Smartburn - ON
kprobe only test
pi max- 243
pif max- 6
..............................................................
Second test 2.4 with
opc ticked
Smartburn - ON
kprobe only test
pi max- 178
pif max- 9
....................................................
third test 4x speed
opc ticked
Force Hyper Tuning - ON
Online Hyper Tuning - ON
Smartburn - ON
Overspeed - ON
Clear OPC - YES
ran this burn threw kprobe and nero speed
kprobe:
pi max -43
pifmax -max 6

nero speed:
PI Errors
Maximum: 41
Average: 2.24
Total: 74618
PI failures
Maximum: 6
Average: 0.03
Total: 9312
View attachment 4928

View attachment 4929

View attachment 4930

View attachment 4931

Ill try more burns when I awake any thoughts will be appreciated
 

stanna38

Noob Account
Nov 2, 2011
2
0
england
What were your Imgburn settings Stanna please, did you burn at 4x?

Like you having a nightmare with MKM 003's
Well everythings gone to sh*t again now mate, so its got to be these mkm 003`s there not the singapore ones, have got singapore in the post i`m pretty confident they will work better.
 

biolite420

Junior Member
Jan 23, 2011
11
0
I am currently trying to burn in safe mode with force tuning off And everything else on at 4 x. Hopefully this will make it work I'll find out in 5 hours when I get home from work
 

c33v33

Noob Account
Nov 2, 2011
7
0
I can't for the life of me get the mkm003 in the parameters. Turning off my antivirus helped I only did online hyper tuning and that helped. I went through 50+ discs then went and got some mkm001 discs made all the difference on my end.
This worked for my setup of ihas124 with MKM003:

Smart Burn ON
Force Hyper Tuning ON
Over Speed Writing ON
Online Hyper Tuning OFF

Clear OPC History before every burn.
Turn ON OPC in IMGBurn.
Write at 4x.

Please let me know if this works for you, too.
 

KrAyZiE

Junior Member
Jan 6, 2011
10
0
Thanks finally can burn these bitches figured overburn would b worse so didnt try that.

Now i get this result or close jus bout evrytime

4x MKM 001
Force HT on
Online HT on
OverSpeed on
SmartBurn on
OPC on
Intel P67 as sata

 

crackle8

Full Member
Oct 17, 2011
61
0
Northern England
This worked for my setup of ihas124 with MKM003:

Smart Burn ON
Force Hyper Tuning ON
Over Speed Writing ON
Online Hyper Tuning OFF

Clear OPC History before every burn.
Turn ON OPC in IMGBurn.
Write at 4x.

Please let me know if this works for you, too.
Thanks c33v33, trying it now, were you having much trouble before you found these settings ?
 

crackle8

Full Member
Oct 17, 2011
61
0
Northern England
c33v33, just completed my first burn, results were better than i've had before,

PI Max = 37, Average = 5.31
PFI Max = 2 Average = .02
Using Singapore MKM 003's
Safe mode win 7 64bit

Slightly outside peramiters on PI but i hope that will squeeze through, not counting my chickens yet but i'm trying another burn or two to test.

Thanks, this is the best i've had yet (i've burned 50 Verbs to get this far!!!), let's hope it stays this way.
 
Last edited:

K1LLER HORNET

Noob Account
Jan 30, 2011
1
0
THANK YOU!!!

Worked for me after trying everything everything suggested on the forums.
Wasted 3 Verbatims & 2 Aone discs. Nothing compared to others I know, but I'm thankful it's not more.

Thanks again :D
 

biolite420

Junior Member
Jan 23, 2011
11
0
Ok came back to work to this!!!
Win7 64 bit safe mode intel ICH10 sata
OHT on
FHT off
Smartburn on
Overspeed on
burnproof unticked
opc on
cleared opc b4 burn
4x

Not sure about spike at begining maybe gota trun FHT on?
Date : 11/3/2011 3:39:47 PM
Model : 0-0-0-0 F:ATAPI iHAS324 B AL1B
Disc : DVD+R DL , MKM001 [Mitsubishi Chemical Corporation]
Speed : 4x
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 4267014
Sampling count : 250729
Errors : 0
PI Max : 89
PI Average : 1.39
PI Total : 43461
PIF Max : 3
PIF Average : 0.07
PIF Total : 2052

BUT HEY ITS IN THE LIMIT!
 

biolite420

Junior Member
Jan 23, 2011
11
0
so I turned on FHT and turned off OHT this was my second attempt...oh and are you guys running with Burn-proof on or off? Any help would be appreciated..gonna try another with all settings on now.

Date : 11/3/2011 5:35:12 PM
Model : 0-0-0-0 F:ATAPI iHAS324 B AL1B
Disc : DVD+R DL , MKM001 [Mitsubishi Chemical Corporation]
Speed : 4x
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 4267009
Sampling count : 250654
Errors : 0
PI Max : 81
PI Average : 1.70
PI Total : 53135
PIF Max : 6
PIF Average : 0.14
PIF Total : 4472
 

sinteger

Noob Account
Nov 3, 2011
1
0
I seem to only be able to get my results within the guidelines on MKM-0001 using:

Booktype for DL (both EEPROM setting and normal setting) set to DVD-ROM.
OPC Off
Overspeed On
Force 4x
Smartburn, Hypertuning, Online Hypertuning all on
 

IamBigWorm

Noob Account
May 10, 2011
8
0
Wasted around 20 discs before finally getting my discs to verify within the stated kprobe parameters.

MKM001 Singapore Printables

X360 USB Pro and molex to sata power connector for my power and burned using my Toshiba labtop.

IHAS124B Burner flashed with burner max 124 fw.

Booted up my system in safe mode.

OPC = Off
FHT= On
OHT=On
Overspeed=On
Smartburn=Off
Cleared OPC History before each burn.

Burned at 4X and here are my kprobe results for BF3 Disc 2 and NBA 2k12.

Hopefully some of you might find this helpful.
 

Shakkan

Noob Account
Nov 4, 2011
1
0
You sir ROCK. I went from max PI of 130-160 to 15 (average 0.5) and from max PIF 6 to 3 (average 0.05). :D
 
Last edited: