Well all thanks to playingmax's tutorial and Bl4k3y's python setup for ecc I have now got a glitched falcon 5773 which did not have a DVD drive.
To boot xell the first time took 9 minutes.
Now it is completed the best boot time I have had is 20 seconds but it averages 1 to 3 minutes.
I have used the standard wiring except I used the top point for the cpu_rst. At the moment I am only using the standard blue wire for this and I am running it over the top of the fan shroud. Will get some of the Lmr100a cable to test and will change the Coolrunner file, at the moment it is using B, C would not glitch at all. I will try A I think as I have read a few people have had success with that.
Nice work tx.
To boot xell the first time took 9 minutes.
Now it is completed the best boot time I have had is 20 seconds but it averages 1 to 3 minutes.
I have used the standard wiring except I used the top point for the cpu_rst. At the moment I am only using the standard blue wire for this and I am running it over the top of the fan shroud. Will get some of the Lmr100a cable to test and will change the Coolrunner file, at the moment it is using B, C would not glitch at all. I will try A I think as I have read a few people have had success with that.
Nice work tx.
