My Nand-X and RGH check list.

C

Chickenfloss

Full Member
Apr 27, 2011
64
0
I am going to use the RGH on two xboxes, one phat, one slim. I already own a ck3pro(NOT rev D) to update the nand-x with. I have already read through all the forums, but want to make sure there is nothing I am overlooking and forgetting. So could anyone verify I have listed everything I will need for the task, hardware wise.

CK3Pro(Non Rev D)
Nand-X retail package.
Slim QSB
2x TX Coolrunners

I chose to wait for QSB as it makes for a clean install and looks nice under the hood. So there it is. What, if anything, am I missing?
 
sergiokazoom

sergiokazoom

Senior Member
Jul 27, 2010
121
0
You Also Need an LPT cable or something to program the coolrunner or a separate cable that will be out for sale soon that will release along with the coolrunner :)
 
C

Chickenfloss

Full Member
Apr 27, 2011
64
0
sergiokazoom said:
You Also Need an LPT cable or something to program the coolrunner or a separate cable that will be out for sale soon that will release along with the coolrunner :)
Click to expand...
From what I understand there is an LPT cable to run from the coolrunner to the Nand-X expansion port that will both power and jtag it, for those without an LPT port and are using a nand-x provided you can update the nand-x via serial, thus my need for the ck3 pro.

I believe what I have stated is correct, but if I am misunderstanding I would love to be corrected. I don't want everything to arrive and I am sitting in a pile of software, hardware, and wires wondering where I went wrong.
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
Ubergeek said:
how in Gods name would you connect an LPT cable to a nandx? lol
Click to expand...
Good point Ubergeek, but at least he is willing to be corrected on the issue :tongue: .....

Chickenfloss said:
I believe what I have stated is correct, but if I am misunderstanding I would love to be corrected. I don't want everything to arrive and I am sitting in a pile of software, hardware, and wires wondering where I went wrong.
Click to expand...
 
Last edited:
B

bandit123

VIP Member
Jul 4, 2010
1,517
68
(UK)
Chickenfloss said:
I am going to use the RGH on two xboxes, one phat, one slim. I already own a ck3pro(NOT rev D) to update the nand-x with. I have already read through all the forums, but want to make sure there is nothing I am overlooking and forgetting. So could anyone verify I have listed everything I will need for the task, hardware wise.

CK3Pro(Non Rev D)
Nand-X retail package.
Slim QSB
2x TX Coolrunners

I chose to wait for QSB as it makes for a clean install and looks nice under the hood. So there it is. What, if anything, am I missing?
Click to expand...
Just a note the QSB is not just only to make it look nice under the hood
uber stated this is reccomended as it help reduce the noise
 
You must log in or register to reply here.