MY SWITCH SETTINGS ARE MESSED UP

[le2r]

I have a 1.6b with an xecture3ce and everything works wonderfully except i can only run my xbox with the switch settings at off, on, off , off, on and it shud run at off, off, off, off, on.

Any ideas?

When i set it too off, off, off, off, on it just is a black screen and nothing happens..

HELP!

 

[MaX ReaLiTy]

I think off, on, off, off, on is the correct setting.

 

[rockclimber]

Yes off,on,off,off is the correct setting and if you are about to flash the chip for the first time you need to change the switches over to on,on,off,off BEFORE you flash so if the flash fails you haven't overwritten your ONLY working bank.
You can change the switches after it boots to the cromwell flashbios screen with the power on.

 

[Martin C]

Take the time and read the tutorials and stickys. The bank select switches are outlined so you know what should be running.

You will flash your X3 BIOS on either banks 1234 1MB or 5678 1MB.

Martin