my trinity wont glitch cr3 pro v 1.02

[jengen32]

Console Type Trinity
NAND size: 16
Dashboard version: e.g 2.0.16202
CB version: 9231


the console working before

rater output
http://paste2.org/feZZOCt8

need some help

 

[BL4K3Y]

It looks like you have the E and F wires soldered to the wrong pads - swap them around.

 

[jengen32]

still not working

 

[chase]

you need to post full r-runner and post-out log

also attach picture of cpu_rst point on post qsb

have you gone through all the dips one by one for a min. 5 cycles each ?

 

[Beaver_Buffcoat]

http://team-xecuter.com/forums/showthread.php?t=140015

http://team-xecuter.com/forums/showthread.php?t=99898

From WNYConsoles:

Trinity Hardware/Wire Setup:
CR3 PRO with 100pf CAP
QSB V3
10cm RST (standard wire) to point 22 on POST QSB V2
Dip Switches 4 + 5
LONG Ribbon Cable