n00b needs help

[volcom_liberated]

i got a question to ask both my 1024 banks have somthing wrong with them when you power on with them it turns on then off then on the off then stays on again and nothing comes up on the screen and the ring around the eject button flash green and orange i was woundering if there was a was to fix those 2 banks? i tried flashing both the 1024k banks when i first installed the x3 and i think the bios i tried to flash them with was a bit screwed and thats when it did /\
read this in another thread would this fix my problem?quote:
1> Boot to the backup BIOS
2> Put the switches in the on,on,off,off position.
3> Make sure you have the 1959_1.6PLUS BIOS .BIN file - exactly 1024kb
4> FLASH that sucka!
5> Leave the switches alone and power up the Xbox (It should turn off after the flash)

 

[C0Ld_BuG]

Did it ever boot to the FlashBios?

C0Ld_BuG

 

[icecreamguys]

the ring around the eject button flash green and orange

Stupid question, maybe, but do you have your AV cable plugged in?

What color is your Xecuter Logo on your external switch?

 

[Audi90Quattro]

you gotta provide more details as to what ver xbox you have, what you tried flashing to your two banks, and the sort.

The instructions you posted may or may not work.

If you have a v1.6 or 1.6b xbox you need to flash the 1959v16_plus.bin if you have a 1.0-1.5 xbox you need to flash just the reg 1959 bios.

Post up some specs and see if you get a better answer.

 

[volcom_liberated]

yes i booted to flashbios but i think i flashed a dodgy version of the x3 bios to them both, the x3 logo is blue and yes the av cables are pluged in rite its just the 2 1mb banks wont load up to flash bios, the other banks work fine but i need the 1mb banks

 

[volcom_liberated]

i am not sure what model my xbox is but its manufacture date is 2003-03-11 so i am guessing its like a 1.3 or 1.4