nand problem

[Clearinx]

Hey!

I have a Falcon, with 5774 CB version. I installed rgh 2 on it like 2 weeks ago, it worked well until today, I could play any game. Today when I was playing, it froze. I turned it off, than on, but it didn't boot, and the fans were at maximum speed. I read the nand and now I have a bunch of bad blocks:

Error: 250 reading block 168Error: 210 reading block 2D3
Error: 210 reading block 2D4
Error: 218 reading block 30E
Error: 258 reading block 30F
Error: 258 reading block 310
Error: 210 reading block 311
Error: 218 reading block 31A
Error: 218 reading block 31E
Error: 218 reading block 322
Error: 218 reading block 324
Error: 258 reading block 325
Error: 218 reading block 326
Error: 218 reading block 32A
Error: 218 reading block 32C
Error: 218 reading block 32E
Error: 218 reading block 330
Error: 218 reading block 332
Error: 218 reading block 336
Error: 218 reading block 338
Error: 218 reading block 33A
Error: 218 reading block 33C
Error: 218 reading block 33E
Error: 210 reading block 35E
Error: 258 reading block 35F
Error: 258 reading block 360
Error: 258 reading block 361
Error: 258 reading block 362
Error: 258 reading block 363
Error: 258 reading block 364
Error: 258 reading block 365
Error: 258 reading block 366
Error: 218 reading block 369
Error: 258 reading block 36A
Error: 258 reading block 36B
Error: 258 reading block 36C
Error: 250 reading block 36D
Error: 218 reading block 37C
Error: 218 reading block 37E
Error: 218 reading block 382
Error: 204 reading block 3DE
Error: 210 reading block 3DF

Previously my only bad block was the number 168.
I wrote back the original nand, the console booted, than I wrote the rgh nand, it starts normally, but when it glitches, I get 1 led error with 1101 secondary code.
Can anybody help me? Is it possible to restore these blocks?

 

[BL4K3Y]

Complete the support template please.

 

[Beaver_Buffcoat]

Did you unplug the power brick from the console after writing the NAND?

 

[Beaver_Buffcoat]

This guy had similar issues with a Corona v6. Might give you some ideas.

 

[Sasuke Uchiha]

Looks like ur nand got corrupted. Just write back your original glitch nand and everything should work. Or it could be your soldering. Wont know till u post pics

 

[Clearinx]

Thanks for your help. I don't think that its because of the soldering, because it worked for more than 2 weeks without any problem.
Just a question: These bad blocks of the nand are physically damaged, or the nand content which it has right now, is missing parts?

 

[Clearinx]

SOLVED!

I earsed the nand and rebuilt a new glitch nand from the original, works like before. Last time I missed to unplug the power brick, maybe that gave me the 1101 error, or that it was an older dashboard version (I forgot that I put 16747 on it, and the original glitch image that I tried was 16537)