Nand size

[Solidus]

hi

I have a short question,
because I didn't find a precise answer how to find the
nand size, does nandpro stop if you try to read a to big nand

so i would try to read 512, 265 and 16 a see what works

Thanks
Solidus

 

[Goldensavage]

You can read the whole Nand if you want.

But anything beyond a certain size is the MU.

So for Jaspers.

I believe you read the first 64 - Nandpro USB: -r64 Filename.bin

That will read the correct size of Nand.

You do not need to read the whole nand.

See this guide, the section about reading nands and it explains about BB Jaspers

**PRO TIP**

Once nandpro has found the usb interface device (the nand-x) it will tell you the size of the nand/internal memory

Flash Config: 00023010 = 16MB
Flash Config: 008A3020 = 256MB
Flash Config: 00AA3020 = 512MB

 

[Krafter]

Have a look at this post here.

 

[Solidus]

both shows that I have the 16MB version

seems so be right.

Thanks
Solidus