I was installing an RGH in a clients 360 slim and my nand x is just giving me that crap ass looking for usb and fail the dump. So I checked all my solder point with a meter and no problems found. So I went ahead and broke open one of my personal phats with pin headers installed that has a cr installed to see if I could dump that. And of course I had no love there same problem. I also tried reflashing the nandpro, uninstalling the drivers and reinstall. I'm thinking my nandx is not working but it does show in device manager fine and flash a CR with no problem. I have contaced xconsole whom I purchesed it through but beings i'm a week away from my 90 day warranty I think they are trying to stall. Any help or ideas would be much appreciated.
Nand Wow's
- Thread starter jeremy790
- Start date
- Status
Yes tried reseting. Well I have tried two different pc's and three different cables, So I'm pretty sure it's not a cable issue.
---------- Post added at 12:23 ---------- Previous post was at 12:22 ----------
Also this is noy just one mobo it is two. One has already been dumped and flashed with the current install.
---------- Post added at 12:23 ---------- Previous post was at 12:22 ----------
Also this is noy just one mobo it is two. One has already been dumped and flashed with the current install.
You say you are working on a clients - How much money have you made using the current nandx?
Considering you're doing it for profit is it really that big of a deal if you have to buy another?
Be sure you're not turning on the xbox with the nandx attached to the computer as blows a fuse I did several that way before I realized thats what was happening. It would still show but wouldn't dump.
Considering you're doing it for profit is it really that big of a deal if you have to buy another?
Be sure you're not turning on the xbox with the nandx attached to the computer as blows a fuse I did several that way before I realized thats what was happening. It would still show but wouldn't dump.
It has made more than enough to pay for itself several times. I orginally got it to just pull the keys from a few boards customers had thrown away there drive but then I figured crap I got so why not really start using it. LOL It's not that big of a deal to buy a new one, just wanted to make sure others have had the same issue. I don't mind giving TX my money for great products that will pay for themselves very easy.
of course its a big deal to buy another i am a fitter by trade and my snapon 3/8 ratchet cost 200 pound if it breaks ill be pissed it has made me money but thats why i purchased it in first place not to do 5 head gaskets and 2 gearboxes to make me a living for my wife and kids
I don't mind giving tx money they have got to make a living aswell as develop new hardware but 90days
Am sure xconsoles will test/replace/repair where necessary
I don't mind giving tx money they have got to make a living aswell as develop new hardware but 90days
Am sure xconsoles will test/replace/repair where necessary
Last edited:
- Status