Nand-X and Nand-X V3

[Ollie82]

Hi,

I bought the new Nand-X V3 but i but I did not notice any difference in the work and speed?

Can clarify the difference between them?

Regards,

Ollie

 

[BL4K3Y]

The NAND-X V3 is needed to program CoolRunners using a NAND-X to CoolRunner JTAG cable, I don't think NandPro's XSVF player works with older ARM versions.

The latest version of NandPro (v30a) only supports devices running V3 ARM firmware.

 

[Ollie82]

So, it don't have anything with making the RGH progress going faster?

 

[BL4K3Y]

It isn't "faster", it is simply running a newer ARM firmware which begs the question - why didn't you update your existing NAND-X (I assume you had one already to be able to make your statement about read/write speeds)?

 

[Ollie82]

Thanks for the clarifications. I bought it and got it today and I may sell the older one.

I also bought J-Programmer and USB-PRO V2? What you recommand to use and get more faster process?

And sorry about my broken English I am from Iraq and I just need a help.

 

[BL4K3Y]

You needed either the NAND-X OR the JR-Programmer, not both.

The NAND-X is faster but the JR-Programmer is cheaper and it works perfectly fine with J-Runner (because it was designed with J-Runner in mind) - this includes NAND read/write tasks and CoolRunner programming.

 

[Ollie82]

Oky doky,Ii don't use J-Runner because I got some issues while using it.

I will use Nand-X V3 and USB-PRO V2.

Cheers mate.

 

[BL4K3Y]

The USB Pro V2 is for drive firmware flashing and has nothing to do with RGH.

 

[NeoGodSpeed]

or wait for the JR-Programmer 2 witch was stated in other posts that it would even be faster with a faster read/write speed, if I remember reading correctly. this would replace the nand-x as they dont have the source from Tiros so it says at 3.0 & with JR-Programmer & JR-Programmer 2 the code it's all Xecuter & can be updated & tweaked & updated when needed or when new products come out & firmware can be made to work with other mods Xecuter makes. nandpro is used with nand-x v1 & v2 so it's limited to what nand pro does with version 3.0

I would keep Nand-x V3 & JR-Programmer 1 & or JR-Programmer 2 when it comes out.

Nand-x are used with nand pro software, as they will not be able to keep up with the newer products Xecuter creates in the near future or will be limited in what they can do. USB-PRO V2 + JR-Programmer 2 will be what everyone owns by end of summer or by fall time this year.

USB-PRO V2 + JR-Programmer 2...
These 2 units will replace Nand-x, USB PRO v1, XECUTER CK3I or CK3 lite.