Nand x & Coolrunner issue.

[Olyboi2]

Hello


Updated nand x to 3.0 with no problem, now i am plugging in the nand x to coolrunner cable to program it and as soon as i plug the coolrunner into the nand x, the lights on the nand x are going out, any ideas?

 

[faz2k2000]

Hello


Updated nand x to 3.0 with no problem, now i am plugging in the nand x to coolrunner cable to program it and as soon as i plug the coolrunner into the nand x, the lights on the nand x are going out, any ideas?

And how are you powering your coolrunner before programming?

 

[Olyboi2]

And how are you powering your coolrunner before programming?

Thanks for the reply, via the usb that recently got released.

 

[dj skam]

Thanks for the reply, via the usb that recently got released.

Try a different USB port you mite not be getting enough power and make sure your molex is properly connected to your ck3 I.e the lights on the ck3 are on!

 

[Olyboi2]

Problem solved

Feel free to close thread.

 

[Olyboi2]

Issue is back, i never programmed it last night when it worked as i was not sure what mobo i was going to be resetting, went to go flash the coolrunner today, same issue? once the nand x looses power after plugging into the coolrunner the pc does not pick up that i have plugged in the nand x again until reboot