nand x error

[m4x192]

hi i have a big problem:
when i go to read the nand nandpro or jtag tool say me:

" Nandpro 3.0a looking for usb interface device can not continue"

help me !!!!!!!!!!!!!!!!

 

[BL4K3Y]

Are your NAND-X drivers installed correctly?

Are there two LEDs on the NAND-X when it is connected (red and yellow)?

 

[m4x192]

yes red and yellow is on.
the drive i think is istalled because initially he read the nand but when arrived to write xell tell me error.. now it tell me ever nandpro 3.0a looking for usb interface device can not continue

 

[Hackerjac]

first you say its when trying to read the nand you get the error, and now its when writtung the nand you get the error, witch one is it ?


and your sure your nandx is updatet to version 3 ?

 

[BL4K3Y]

So you successfully wrote XeLL and that's when errors began to occur?

Could you post images of your wiring please?

 

[m4x192]

so...
1 hours ago i finisched istall rgh on mobo
after i read the nand and read well.
i arrived at the ecc write point and it give me error.
now i cant write and read nand.
i need to read nand and repea all from the beginning but it give me the andpro 3.0a looking for usb interface device can not continue error!

 

[Hackerjac]

that sound like a bad soldering, can you post HQ close-up pic of your install ?


just another thing, have you tried to reboot your pc ?, have happend for me a couple of times where i had to reboot

 

[m4x192]

so:

the solder is perfect.. i tried with multimeter.

 

[BL4K3Y]

Did you reboot your computer as said above?

I am assuming you have unplugged and re-connected the NAND-X to the computer?

 

[x360ccm]

take it you got power goin to your xbox.

plus how many times have we seen the solder is perfect.:rolleyes2:

but then it turns out to be the soldering.

resolder it..:tongue:

 

[m4x192]

this is the solder.
i reebooted.
is the second xbox i trie to rgh. f**k.
i have the last dashboard.
http://imageshack.us/g/542/img0195hv.jpg/
help me pls.
im italian

help meee

 

[x360ccm]

and thats perfect solderin for you hey..:rolleyes2:

 

[Hackerjac]

this dosen't make sence, you are trying to rgh a phat console and at the same time you have jtag qsb abd wirring on it, wtf


and besides that i can see the cpu ppl bypass seems shorten
its not a jasper board so no need for the bluecapacitor on the coolrunner board


to be honest send it to someone that know how to do it before you compåletely destroy the board

 

[x360ccm]

if you dont have the qsb for the rhg install.

then you should wire the nand x wires like in this pic.

 

[m4x192]

here the pics

http://imageshack.us/g/542/img0195hv.jpg/


help me pls its the second xbox i try to mod

---------- Post added at 23:58 ---------- Previous post was at 23:57 ----------

why it ist jasper????

is a jasper 16mb

 

[Hackerjac]

ok maybe i was missjudging the pic, but still the capacitor is for jasper bb 256/512 mostly, but you diden't answer why you have both coolrunner board and jtag board connectet at the same time

 

[frazzeld]

why have you got Jtag wiring? ROL Board?

 

[m4x192]

i cant understand sorry man.
can tell me what i need to solder in order and what do with pc in order?
i have the last dasboard so i cant use the jtag tool because i dont reach the last dasboard so i need to id manually with egg and multiboard 0.7 and nandpr0 v3.

help me guy...

tell for example:
1)istall only coolrunner and coolrunner cable.
read nand
untilll create ecc file
2)istall qsb kit(i have wire because 1part of qsb is broke)
istall xex ...


pls help me step by step ! pls!!!!

 

[x360ccm]

this is how to install the coolrunner.

http://team-xecuter.com/forums/showthread.php?t=74689


and this is how the nand x wires should look.

i take it you dont have the new qsb for the coolrunner install.if you do then follow this

http://team-xecuter.com/forums/showthread.php?t=74857

 

[m4x192]

it say me ever this problem

http://imageshack.us/photo/my-images/851/29397672.png/
p.s.
my xbox cant turn on !i dont know why.....