GENERAL nand-x + "glitch" ?

[moxfalder]

Hi,

My thoughts:

- i plan to get nand-x, and several pin-headers with cables for several consoles.

- then i will solder future jtag consoles for ease connect-and-dumpWrite nand-x.

Question:

- since i don't plan use nand-x only on one console and leave inside the case, HOW is add-on "glitch" for nand-x is been designed: DO I NEED for EVERY jtag glitch nand-x inside ?

Thanks.

 

[playingmax]

ur going to need CoolRunner and its one per console

 

[moxfalder]

ur going to need CoolRunner and its one per console

So this "glitch add-on" for nand-x will NOT be always connected to nand-x !

So how this will be an ADD-ON for nand-x,
don't understand.

 

[M AzeeM K]

So this "glitch add-on" for nand-x will NOT be always connected to nand-x !

So how this will be an ADD-ON for nand-x,
don't understand.

The NAND-X is needed to read/write the NAND.

The CoolRunner Add-on is the thing that is needed to run the Glitch.

That's why, you will use the NAND-X to write the glitch to the NAND. You can then remove the NAND-X.

But the CoolRunner Add-on is itself needed for the glitch to run. Therefore, it'll need to be present in the console so the glitch can run.

 

[C43Mi57]

wait for the release and it will all become clear.

tutorials are always straight forward and clear .... but cant have a tutorial for something that cant be purchased yet.

 

[moxfalder]

Ok,

"nand-x ADD-ON glitch" looks like independent part from nand-x,
and if i want, for example read/write nand just with LPT connection,
i don't need actual nand-x for glitch jtag to work.

"use the NAND-X to write the glitch to the NAND" maybe you mean
use nand-x to programme glitch with new hardware compatibility like falcon ?

 

[moxfalder]

Anyway,

i will buy new jtag tools if it will be re-packaged like this:

- nand-x usb programmer
- "glitch" by TX
- required cables for nand-x and "glitch"

I don't need OLD jtag tools+cables from actual nand-x package.

Thanks.

 

[M AzeeM K]

Anyway,

i will buy new jtag tools if it will be re-packaged like this:

- nand-x usb programmer
- "glitch" by TX
- required cables for nand-x and "glitch"

I don't need OLD jtag tools+cables from actual nand-x package.

Thanks.

The only extra thing (now) present in the original NAND-X package are the JTAG QSBs, everything else is still necessary.

 

[MightyShots]

So we can use the QSB's in the Nand-X package now for Trinity boards? Because if i solder the Nand-X cables in the i shall leave the cable in the case and just conect the Nand-X when required.

 

[manwithoutname]

QSB's for Slim version are due release by TX. However whether will this be sold separately only or will be included with the NAND-X in future production is to be seen.

One thing for sure, it will be sold as a separate item for those who already own the NAND-X.