NAND-X JTAG Install Guides JTAG KITS #2, #5, #8, E79

waqypaqy

Junior Member
Dec 9, 2011
16
0
Re: NAND-X Installation Guides *UPDATED JULY 9TH*

I'm gonan give it a go and try installing the JTAG QSBs. My only concern is which parts of the QSB do I solder down onto the mobo? all of the silver bits or will one do? Where could I find close-up images of J2B1 and J1D2 installed on a motherboard? I've got a Xenon btw :)
 

n1ght0wl

BANNED
Nov 30, 2011
801
0
London
Re: NAND-X Installation Guides *UPDATED JULY 9TH*

I'm gonan give it a go and try installing the JTAG QSBs. My only concern is which parts of the QSB do I solder down onto the mobo? all of the silver bits or will one do?
did you even read post 1 in this topic ? i think you should start there :D
 

waqypaqy

Junior Member
Dec 9, 2011
16
0
Re: NAND-X Installation Guides *UPDATED JULY 9TH*

did you even read post 1 in this topic ? i think you should start there :D
thanks for the reply .yes i did see the post #1 pics but wanted something a bit closer i guess :facepalm:

i just dont wanna incorrectly solder it and end up messing the mobo up :confused:
 
Sep 9, 2011
123
0
Re: NAND-X Installation Diagrams

did you get your nand x yet? got mine from modchip.ca fast next day.. still seeing how this sh*t works im getting it.. lots of old misleading info.. they should take all the old info off the sites and put nand x..
 

factistrue

Full Member
May 31, 2013
42
0
Re: NAND-X Installation Diagrams

Hi. Im having some trouble with JTAG my Xbox. It has a dash 15574 and a CB 6754 this should be jtagable correct? I read the name compared without any problems. Installed the JTAG kit #5 and create and wrote xell and when I boot with eject...it takes awhile then 3 rrod black screen. Any ideas..the secondary code is 00223... I tried reverting to original backup band but still 3rrod after awhile. Any clue.
 

gavin_darkglide

VIP Member
Dec 14, 2012
2,311
118
Re: NAND-X Installation Diagrams

Hi. Im having some trouble with JTAG my Xbox. It has a dash 15574 and a CB 6754 this should be jtagable correct? I read the name compared without any problems. Installed the JTAG kit #5 and create and wrote xell and when I boot with eject...it takes awhile then 3 rrod black screen. Any ideas..the secondary code is 00223... I tried reverting to original backup band but still 3rrod after awhile. Any clue.
Install R-Jtag. Jtag stops working on any dash after 2.0.7379. Your options are rgh2.0 which sucks on pretty much all phats, or R-jtag, which will give you almost instant boot times if you configure it right.
 

scott1503

VIP Member
Jul 21, 2012
1,783
88
Harrogate, North Yorkshire , uk
Re: NAND-X Installation Diagrams

Install R-Jtag. Jtag stops working on any dash after 2.0.7379. Your options are rgh2.0 which sucks on pretty much all phats, or R-jtag, which will give you almost instant boot times if you configure it right.
You mean dash 7371
 

factistrue

Full Member
May 31, 2013
42
0
Re: NAND-X Installation Diagrams

Install R-Jtag. Jtag stops working on any dash after 2.0.7379. Your options are rgh2.0 which sucks on pretty much all phats, or R-jtag, which will give you almost instant boot times if you configure it right.
Thanks. Will do. Can I still use the JTAG kit #5 that's already soldered on? Or should I try to remove it to install the board that came with the r-jtag kit? The two boards look similar and install on the alternate points below the mono.
 

factistrue

Full Member
May 31, 2013
42
0
Re: NAND-X Installation Diagrams

The original QSB is fine.
So I bought the R-Jtag kit installed everything with the aud_clamp, read the nand, created xell with Aud_Clamp, and R-Jtag checked. Everything seems okay no rrod or anything. Set my dips to 7,8 on tested with rater no glitch. Tried several dip settings, voltage settings etc. as recommended in this guide http://team-xecuter.com/forums/showthread.php/135779-Xecuter-R-JTAG-Installation-amp-Setup-Guide-***-UPDATED-JULY-26th-2013-*** and still won't glitch. Any help? I know this is the wrong forum for R-Jtag but this is just a follow up to the original posts. Heres the rater logs:

Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post E0
Post A0 - Panic - VERIFY_SECOTP_6
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post 90 - Panic - VMX_ASSIST
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post A0 - Panic - VERIFY_SECOTP_6
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post A0 - Panic - VERIFY_SECOTP_6
Post 18 - FETCH_CONTENTS
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Most Fails(cumulative): 0xA0
Shutdown
Resetting................
 
Last edited:

Support Our Sponsors