NAND-X not recognized

[LEENO]

hello,
i have xbox slim with loose key, i installed coolrunner for recovery key. I not know dash version.
When i connect usb, no device is detected so typing
NandPro.exe usb: -r64 nanddump.bin
it say no device found and crash.

Please help me

 

[Martin C]

1. you've not soldered your NAND-x to the board. The connection from the coolrunner to the NAND-x is purely to program the Coolrunner.
2. Getting the DVD key will not be enough unless you want to leave this as an RGH console afterwards.

 

[LEENO]

problem was in nand-x not programmed.

Now i have other problem,
typing NandPro.exe usb: -r64 nanddump.bin
it say

D:\Desktop\RGH\Nandpro30>NandPro.exe usb: -r64 nanddump.bin
NandPro v3.0a by Tiros

Looking for usb interface device
Can not continue

 

[LEENO]

i programmed coolrunner with
NandPro xsvf: trinity1.1.xsvf

is it right?

 

[reefz3ro]

Exactly what Martin has said if you have change nothing since photo your getting looking for usb interface device because you need to solder nand-x wires to the board to dump your nand

also the command should be nandpro usb: -r16 nanddump.bin for trinity

 

[LEENO]

I not found button for thanks,

1) Please can you give schematics for nand-x soldering?

2) connecting xbox to tv, it only show green led blinking and black screen, is it normal?

3) after key recovered, 16d4s (xecuter pcb) will not work without coolrunner?

 

[reefz3ro]

http://team-xecuter.com/forums/showthread.php?t=70219 those are points you need to solder your nandx wires to to read nand

you will have to leave it as RGH console for it to work if you do not have the dummy.bin for your slim dvd drive

i assume that you have lost or never got the key for the dvd drive and erased the drive and thats why you are using this method to get the key

 

[LEENO]

If i leave coolrunner, dvd backup will work in 16d4s or will work only backup on hard disk?

 

[sarah1331]

you need to leave coolrunner in and patch your nand with a dvd key from a dvd drive you have a full dump of
use this dump on the drive you wish yo use with this console


otherwise just knowing the key wont do any good unless its a 9504/0272
and you have the dvd case orig pcb and laser to rebuild your serial info

only if its a 9504/0272 and knowing the serial info can you then remove coolrunner (flashing your stock nand first) build a dummy flash it to a 16d4s whala

---------- Post added at 06:16 ---------- Previous post was at 06:14 ----------

you need to leave coolrunner in and patch your nand with a dvd key from a dvd drive you have a full dump of
use this dump on the drive you wish yo use with this console


otherwise just knowing the key wont do any good unless its a 9504/0272
and you have the dvd case orig pcb and laser to rebuild your serial info

only if its a 9504/0272 and knowing the serial info can you then remove coolrunner (flashing your stock nand first) build a dummy flash it to a 16d4s whala

sorry make sure you patch nand with key and keys OSIG

 

[LEENO]

Sorry, i dont understand and i cant explain good,
i retry

Original 16d4s pcb is dead and i not have key,
i have new white pcb, will it work with coolrunner?
If yes, please explain procedure

 

[sarah1331]

yes what fw does it say on your dvd drive

---------- Post added at 06:32 ---------- Previous post was at 06:31 ----------

is the dvd drive come with this motherbord from microsoft

 

[LEENO]

i don nand backup now, but 360 multibuilder ask for
The file "cpukey.txt" is missing from "Data\my360" folder

How get cpukey?

 

[sarah1331]

multibuildwr should create you an ecc flash this with +w2 and boot using eject please read some tutorials before doing anything make a few copies of your nanddump and keep em safe don't touch em I see somthing going wrong

Sent from my HTC Vision using Tapatalk

 

[LEENO]

i done nand backup,
done ecc file and succesfull writed using command
NandPro.exe usb: +w16 image_00000000.ecc

Now i connected xbox (without dvd drive) to tv but ih have black screen and green led blinking

 

[reefz3ro]

Based on your pics I would suggest putting the blue
CPU_RST wire under the xclamp and see if it boots to xell

 

[LEENO]

finally rgh is started, i copyed cpukey and dvd key,
i have new pcb 16d4s fw 9504,
please explain me procedure for make new 16d4s pcb working

 

[sarah1331]

What fw does jrunner show your nand as having

Sent from my HTC Vision using Tapatalk

 

[sarah1331]

And if it says 9504
Do you have your orignal Dvd drive that came with the XBOX for the serial numbers

Sent from my HTC Vision using Tapatalk

 

[LEENO]

nand version 9188,
6bl 13599
original dvd drive i not know, it is broken

 

[LEENO]

now i started xbox with nand patched and coolrunner,
when i insert dvd, it freeze at xbox logo, even with original dvd