NAND-X Slim Install Question

[longdog]

Hi
I have found this http://team-xecuter.com/forums/showthread.php?t=54423&highlight=nand-x+qsb+install tut on Nand install but I'm installing nand qsb's on a slim is there a tut for that?
Thanks

---------- Post added at 03:31 ---------- Previous post was at 03:30 ----------

also I can install the nand-x qsb's and get my cpu-key then program install the coolerrunner right?

 

[WestCoastConsoles]

http://www.team-xecuter.com/forums/showthread.php?t=74856

There are plenty of tutorials on here, to get your CPU key you need the coolrunner installed or it won't boot xell

 

[longdog]

Thanks
I have read that I need to program the coolrunner before I install it, but you can't program the coolrunner till you get you cpu-key! is that right or wrong?
Thanks

 

[RROD!]

No you can program it before no key or anything need for the coolrunner just flash it with the mortherboard rev glitch files use j runner and you can't go wrong

 

[Coleman]

You don't need your CPU key to program your coolrunner just your motherboard type.

 

[AMIT]

Just follow this !

 

[longdog]

So if I understand right I need the coolrunner installed to the mother board before I program it, Right?
Thanks

 

[SLIM360]

So if I understand right I need the coolrunner installed to the mother board before I program it, Right?
Thanks

NO,1st program the coolrunner then install it ,it would be easier !

 

[longdog]

When I program my Coolrunner for the first time with JRunner do I need to set it to Glitch Or Jtag?
Thanks

---------- Post added at 06:10 ---------- Previous post was at 06:09 ----------

there's also retail

 

[neophyte5001]

RGH is glitch.

You may want to do some serious tut research before you proceed.

 

[longdog]

Does this look right, at the end it says failed.

No Updates Found

Checking Files
Finished Checking Files
Programming Coolrunner
Flashing D:\xbins\3-26-11\J-Runner\J-Runner v01 Beta (263) Core Pack\J-Runner\common\xsvf\trinity.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 2B50
Failed with 0x0002 status!

Exited!

 

[longdog]

It worked the second time
Thanks