NAND-X units R brilliant when used correctly :)

[kiolejesus]

Re: NAND-X units R a load of s**te

Cover your points in flux and reflow them, I had a slim that was temperamental and worked for a few minutes then wouldn't read. I reflowed the points with flux and all is good.

 

[mickeyvilla]

Re: NAND-X units R a load of s**te

Cover your points in flux and reflow them, I had a slim that was temperamental and worked for a few minutes then wouldn't read. I reflowed the points with flux and all is good.

does not need reflowing this is the 3rd time i've said this all wirers are connectted to the board i've tested the alternative points with a meter they are all connected :facepalm:

---------- Post added at 17:09 ---------- Previous post was at 17:02 ----------

Send me your Nand-X to test, I have 3 that have never failed, if yours is faulty i'll send you mine while modtraders sort your replacement out... I can't help any more than that but I honestly see problems with your soldering, what iron are you using ?

i've been soldering for years m8 i've even checked all these joints with a jewlers loup i can see the weld on the board & to qsb.

where about are you,i'm in birmingham

 

[Martin C]

Re: NAND-X units R a load of s**te

Mickeyvilla's going to be along here VERY shortly to explain why his NAND-x stopped reading and writing. Those of you having similar issues should have a good read of how he resolved it.....

 

[Xmarksthesh0t]

Re: NAND-X units R a load of s**te

so he fixed it?

 

[spandaman]

It is not soldering related in my opinion, I use my own pinheaders and NAND-x writes fine. Then disconnect it and when u try to reconnect nandx I get USB error unable to continue, unplug and re plug the NAND-x several times after a while it works, so there is a issue somewhere with the NAND-x


Sent from my iPhone using Tapatalk

 

[Martin C]

Re: NAND-X units R a load of s**te

I think he's keeping his head down.

He PM'd me asking if I could fix it, to which I said "yes but it's a repair not an install". I got a reply back saying he's sorted it. He was plugging the green and blue connecters into the wrong sockets on the QSB. He's put them in the RIGHT ones (as the colours are very close to each other) and it's working now.

Yep, another PICNIC issue.

 

[dragontm]

Re: NAND-X units R a load of s**te

lol how funny

 

[sick360mods]

Down to peckac as usual

Sent from my PC36100 using Tapatalk

 

[krypt1c]

Re: NAND-X units R a load of s**te

Supposing he`s feeling abit silly now:facepalm:

 

[n1ght0wl]

Re: NAND-X units R a load of s**te

I think he's keeping his head down.

He PM'd me asking if I could fix it, to which I said "yes but it's a repair not an install". I got a reply back saying he's sorted it. He was plugging the green and blue connecters into the wrong sockets on the QSB. He's put them in the RIGHT ones (as the colours are very close to each other) and it's working now.

Yep, another PICNIC issue.

now that by far is a classic :facepalm: :biggrin:

 

[sherlock]

Re: NAND-X units R a load of s**te

i take he'll be back to retract all the things that he said about the nand-x being a load of s**te..:facepalm:

 

[jayfig]

Re: NAND-X units R a load of s**te

I think he's keeping his head down.

He PM'd me asking if I could fix it, to which I said "yes but it's a repair not an install". I got a reply back saying he's sorted it. He was plugging the green and blue connecters into the wrong sockets on the QSB. He's put them in the RIGHT ones (as the colours are very close to each other) and it's working now.

Yep, another PICNIC issue.

:facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm::facepalm:

 

[mickeyvilla]

Re: NAND-X units R a load of s**te

Mickeyvilla's going to be along here VERY shortly to explain why his NAND-x stopped reading and writing. Those of you having similar issues should have a good read of how he resolved it.....

cheers martin c lol i knew it was'nt my soldering though.

yeah being the thicko that i am & being stuck on this for a week in the end it was a case of having them 2 little plug ins in the wrong sockets.
the blue & green 2 wire plugs although they are very simlar in colour or is it just me going colour blind.

i like to appologise to TX for doughting their product & any 1 els who i may offended,but my head has been screwed for days with this i just could'nt under stand why it worked 1 minute but not the next.

i'll await the barrage of abuse now,lol

 

[sherlock]

Re: NAND-X units R a load of s**te

all i will say is i'm glad you got it sorted....

 

[bandit123]

Re: NAND-X units R a load of s**te

glad u sorted it mate sometimes its the simple things that catch us out IE my 1 bit of solder on my first jtag

i swore blind it was perfect and for days was screaming on here went over the steps 100s of times

sometimes its hard to see for looking if u get what i mean

 

[iave9504]

Re: NAND-X units R a load of s**te

It is not soldering related in my opinion, I use my own pinheaders and NAND-x writes fine. Then disconnect it and when u try to reconnect nandx I get USB error unable to continue, unplug and re plug the NAND-x several times after a while it works, so there is a issue somewhere with the NAND-x


Sent from my iPhone using Tapatalk

i had a brand new nand x with v3 code which done the same thing then completely died after 2 installs.

Ive got a new one which also does the same but thankfully works fine

 

[mickeyvilla]

Re: NAND-X units R a load of s**te

thanks for not shooting me down bandit & sherlock i now have a glitched slim.

but i do still have the same problem with the xenon,have i got the right wirers soldered to the right points on mobo ?

 

[sherlock]

Re: NAND-X units R a load of s**te

you do know that you can't glitch a xenon.

 

[mickeyvilla]

Re: NAND-X units R a load of s**te

you do know that you can't glitch a xenon.

yeah i know i'm jtagging it with the qsb that came with my nand-x unit

 

[synxx]

Re: NAND-X units R a load of s**te

cheers martin c lol i knew it was'nt my soldering though.

yeah being the thicko that i am & being stuck on this for a week in the end it was a case of having them 2 little plug ins in the wrong sockets.
the blue & green 2 wire plugs although they are very simlar in colour or is it just me going colour blind.

i like to appologise to TX for doughting their product & any 1 els who i may offended,but my head has been screwed for days with this i just could'nt under stand why it worked 1 minute but not the next.

i'll await the barrage of abuse now,lol

better man knows when to hold his hands up and admit he was wrong and apologise.
just read through this and thought it was never gonna end lol. glad its worked out for you pal.