Nand X USB Update cable Failed to Autobaud

[junivelli]

Hi
i recently bought a Nand X USB update cable to update my NAND X device to be able to program my coolrunner chip,i installed the drives for the nand x usb update cable, now it shows as COM 3 in my device manager, then i followed the second part of this tutorial http://www.team-xecuter.com/forums/showthread.php?t=74259 and im still getting the Failed to autobaud, i even tried to changed the Oscillator (MHz): 12 and still doesnt work, is anyone can help me out

 

[smoken]

Are you using the CK3 Pro rev D?

 

[junivelli]

im using the USB update cable http://www.xconsoles.com/products/xecuter-nandx-usb-update-cable.html

i did install the drives for it and shows as COM3

 

[modslave]

You could check the update cable wiring as a batch was wired in reverse
http://team-xecuter.com/forums/showthread.php?t=75777

I don't like the sound of this as I have just gave in and ordered the usb update cable myself after endlessly failing to update my nandx using a CK3 Pro.]

 

[junivelli]

Hi
is anyone had the same problem, "failed to autobault" when trying to update the nand x via the usb update cable, or find a way to solved it,