Nandpro see wrong NAND size...

[beyond666]

SOLVED (see my post #3)

Hi all.
Xell Reloaded boot every time between 9 - 23 second. So RGH chip installed ok.
I have write image with USB stick and i think is written ok (see image).

Nothing happens when i flash my NAND with donor dump (yes, donor dump is prepared for me by other member).
Screen is black.
Xbox doesn't boot (turning on with power button).

I have even try to write on NAND with nandpro. Command: nandpro usb: +w64 nandflash.bin
Same thing. Only black screen. Fans works normal. There is no difference with/without dvd rom.
After every writing i have unplugged power cord and after 2 minutes plugged it back.

Why is my NAND recognized as 512 MB? Nandpro says NAND is 00AA3020 instead 008A3020.
I'm 100% sure is it 256MB.

 

[Martin C]

You should be using -w when writing created NANDs.

If XeLL boots, then it's your image that's the problem.

Both NANDPro and rawflash are reporting 512MB, so that's what you have (not that it's relevant here).

Why start a thread? Go to the person who made the NAND for you. My money's on it being LDV related.

 

[beyond666]

If XeLL boots, then it's your image that's the problem.
Go to the person who made the NAND for you. My money's on it being LDV related.

Damn you! Problem solved. My LDV is 7, but i got NAND image with LDV 11.
When creating NAND image it need to change LDV. 360 Multi Builder have option.ini file. In that file there is line: cfldv =
I just needed to put my LDV number and bang! Image is ready to write.
Thanks for LDV tip!