Need a little help understanding this...

[slackery]

So I decided to hook up my 360 after being inside a box for around 4 years and to fully hack it and get the best out of it since is now a "dead" console. I know I can't Jtag it since my dashboard is 2.0.17150.0 so I guess i need a RGH kit but I dont know which one I should get since theres a lot out there. As far I understand my board is the Jasper so any help will be grateful.

 

[GeekHeat]

Google rgh1.2. This is cheapest and best method.

 

[slackery]

Do I also need the NAND-X or will work using a common jtag cable? I dont mind waiting 35 minutes to read the nand and stuff

 

[GeekHeat]

Get a nand x or Jr programmer. Trust me it's the best option.

 

[slackery]

Well I only found a CoolRunner rev D which for what I read is a clon but can work but the nand-x is expensive or are out of stock same as the JR... seems im out of options

 

[john mathews]

if in the usa and this is your only console .il do it for 40.00 plus shipping:cool2:

 

[slackery]

I live in Puerto Rico sorry

 

[john mathews]

I live in Puerto Rico sorry

u could order from modchipcentral.com

- - - Updated - - -

Or ebay

 

[gavin_darkglide]

Or use one of the many other spi based nand readers out there, some are less than 10$ and will work for your purposes.

 

[Will~]

If you have the money get the Jr-Programmer 2 as R/W. And you program the coolrunners with things like Nand-X and JR-Programmer, coolrunners dont do the same job you need both. Its quite a costly process so make sure you have the time and money and of coarse equipment. I think the CR3pro would be a good opion wit either the Nand-X or Jr-programmer 2.