i have a slim that i dumped the nand when it was on 12611 and it has been online since and now i need to build a 13599. any ideas or advice/help would be appreciated.
thanks
thanks
Need help /advice rebuilding a nand
- Thread starter spandaman
- Start date
i don't understand what you mean but if you have been on line recently it will now have a 13599 nand and you could just re dump it. i don't think there is a way you could build a different version nand without the cpu key unless something new has sneaked out to do with the ResetGH i don't know about
edit. i understand now i read the next post but have no idea as i'm not up to scratch yet on RGH
edit. i understand now i read the next post but have no idea as i'm not up to scratch yet on RGH
Last edited:
sorry maybe ive explained it wrong.
i dumped my 360 slim's nand when it was on 12611 dash. I have since then played on xbl so its updated to 13599 dash.
I did the RGH hack using one of my previously dumped nands (12611)
which has now wiped over my original 13599.
My fault for being too eager and not thinking to dump again. I do have my cpukey.
i dumped my 360 slim's nand when it was on 12611 dash. I have since then played on xbl so its updated to 13599 dash.
I did the RGH hack using one of my previously dumped nands (12611)
which has now wiped over my original 13599.
My fault for being too eager and not thinking to dump again. I do have my cpukey.
Martin C
VIP Member
Have you still got the untouched 12611? Did you go directly to 13599 from here?
If so, just increase the LDV by one in 360 Flash Dump Tool and flash back to your NAND. It should boot, allowing you to re-update and then re-dump.
If so, just increase the LDV by one in 360 Flash Dump Tool and flash back to your NAND. It should boot, allowing you to re-update and then re-dump.
Finally a technical answer that may make sense thanks ill try now, do i increase both ldv's ?
the ones in red ?
the ones in red ?
Martin C
VIP Member
You my friend are a life saver. godsend to me and this site changed both values and booted up perfectly thank you 
Martin C
VIP Member
all these threads and 1 answer from you and its sorted thanks again.
http://tech-modz.net/showthread.php?t=972
http://www.cygnos360.com/forum/index.php?topic=3147.15
http://www.xboxhacker.org/index.php?topic=17067.0
Thanks again m8
http://tech-modz.net/showthread.php?t=972
http://www.cygnos360.com/forum/index.php?topic=3147.15
http://www.xboxhacker.org/index.php?topic=17067.0
Thanks again m8
Martin C
VIP Member
changed both and then just the first and all the same m8, it connects to live, i accept the update it downloads fine, but then says preparing update then rrod E81. Also tried updating via usb and same
Martin C
VIP Member
Martin C
VIP Member
Any chance your 13599 is corrupted?
Failing that, compare both 12611 and 13146 dumps in 360 Flash Dump Tool and post screenshots here.
Failing that, compare both 12611 and 13146 dumps in 360 Flash Dump Tool and post screenshots here.
Martin C
VIP Member
so backtrack a mo
your 12611 had LDVs of 3 and 2 respectively.
Did you change these both by one to get 4 and 3?
So now 13146 has been flashed, the LDV for 6BL has jumped from 3 to 5?
These values should only go up by one per update, so you've done something else in the meantime.
Do a google for changing LDVs on a 360 NAND. I'm off out now, but I think you can change both values to the highest number (i.e both 5) and it should sort it.
your 12611 had LDVs of 3 and 2 respectively.
Did you change these both by one to get 4 and 3?
So now 13146 has been flashed, the LDV for 6BL has jumped from 3 to 5?
These values should only go up by one per update, so you've done something else in the meantime.
Do a google for changing LDVs on a 360 NAND. I'm off out now, but I think you can change both values to the highest number (i.e both 5) and it should sort it.
all i did was change the LDV's by 1. then updated to 13146. ive tried both LDV'S at 5 and it still wont update?
here is a pic of all my nands.
here is a pic of all my nands.