GENERAL Need Help Bad Block Error Zephyr

E

eliel97

Full Member
Aug 25, 2015
27
0
Hey guys i'm new to the rgh scene. I recently dumped my nands, but ended up getting a bad block remapped error. Not really sure what to do from here on. Should i resolder my wires or continue? Here's my log my j-runner.................

Tuesday, August 25, 2015 1:33:33 AM

J-Runner v0.3 Beta (7) Started


It's advised to run in administrator mode on Windows 8

Checking Files
Finished Checking Files
Zephyr Manually Selected
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 4569
Zephyr
Reading Nand to C:\Users\Eliel Arredondo\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 9
Done!
in 3:32 min:sec

Reading Nand to C:\Users\Eliel Arredondo\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Zephyr
Jtag Selected
Nand Initialization Finished
Reading Nand
Error: 250 reading block 9
Done!
in 3:53 min:sec

Reading Nand to C:\Users\Eliel Arredondo\Desktop\J-Runner v3 (5) Core Pack\output\nanddump3.bin
Comparing...
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Reading Nand
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Nands are the same
Error: 250 reading block 9
Done!
in 3:33 min:sec

Reading Nand to C:\Users\Eliel Arredondo\Desktop\J-Runner v3 (5) Core Pack\output\nanddump4.bin
Comparing...
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Reading Nand
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Nands are the same
Error: 250 reading block 9
Done!
in 3:32 min:sec

Comparing...
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Nands are the same
 
nofeloniesyet

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
eliel97 said:
Hey guys i'm new to the rgh scene. I recently dumped my nands, but ended up getting a bad block remapped error. Not really sure what to do from here on. Should i resolder my wires or continue? Here's my log my j-runner.................

Tuesday, August 25, 2015 1:33:33 AM

J-Runner v0.3 Beta (7) Started


It's advised to run in administrator mode on Windows 8

Checking Files
Finished Checking Files
Zephyr Manually Selected
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 4569
Zephyr
Reading Nand to C:\Users\Eliel Arredondo\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 9
Done!
in 3:32 min:sec

Reading Nand to C:\Users\Eliel Arredondo\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Zephyr
Jtag Selected
Nand Initialization Finished
Reading Nand
Error: 250 reading block 9
Done!
in 3:53 min:sec

Reading Nand to C:\Users\Eliel Arredondo\Desktop\J-Runner v3 (5) Core Pack\output\nanddump3.bin
Comparing...
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Reading Nand
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Nands are the same
Error: 250 reading block 9
Done!
in 3:33 min:sec

Reading Nand to C:\Users\Eliel Arredondo\Desktop\J-Runner v3 (5) Core Pack\output\nanddump4.bin
Comparing...
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Reading Nand
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Nands are the same
Error: 250 reading block 9
Done!
in 3:32 min:sec

Comparing...
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Bad Block ID 0009 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0009 [Offset: 0x25200]
Bad Blocks Remapped
Nands are the same
Click to expand...
a bad block is a bad block.as long as its the same on both nands (nands match) just continue on,jrunner will deal with it.
 
D

Dadko

VIP Member
Apr 2, 2015
209
23
Just continue with install. It said, it was remapped, consider it as fixed. You should be fine
 
E

eliel97

Full Member
Aug 25, 2015
27
0
Unfortunetly my xbox 360 red ringed on me, but thankfully i have a spare jasper to back me up, but not sure if i could rgh do to the fact that my cb version is 6754. I ordered a cr4 xl only no usb's. If i can't rgh my jasper can i r-jtag my jasper without the QSB and QSB Post Phat V2?
 
Nintendo

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
eliel97 said:
Unfortunetly my xbox 360 red ringed on me, but thankfully i have a spare jasper to back me up, but not sure if i could rgh do to the fact that my cb version is 6754. I ordered a cr4 xl only no usb's. If i can't rgh my jasper can i r-jtag my jasper without the QSB and QSB Post Phat V2?
Click to expand...
CB 6754 works perfectly. Yeah you can install it without the QSBs but it's better to install them.
 
E

eliel97

Full Member
Aug 25, 2015
27
0
I know you could install the cr4 xl without the qsb, but what about the Post Phat V2. i saw another thread were it said you absolutely need the Post Phat v2. What exactly does the Post Phat v2 do anyways. Im little bit confused. Now
 
Nintendo

Nintendo

VIP Member
Sep 5, 2014
605
33
Spain
eliel97 said:
I know you could install the cr4 xl without the qsb, but what about the Post Phat V2. i saw another thread were it said you absolutely need the Post Phat v2. What exactly does the Post Phat v2 do anyways. Im little bit confused. Now
Click to expand...
You need the Post QSB if you were using the R-JTAG chip, but you are using the CR4XL
 
E

eliel97

Full Member
Aug 25, 2015
27
0
alright I'm still researching how all this works. I'ma try this again tomorrow. By the way what more recommendable a rev c or cr4xl on a jasper? I don't have the QSB for both, and by the way this is my first time reset glitching a console. What do you guys recommend for a beginner?
 
You must log in or register to reply here.