Need Help Bad Blocks Jasper 16mb

[mnkay]

Sent

 

[Martin C]

downloading it now - it's only 108MB....!

 

[Martin C]

ok - from the files you send me, you have a nanddump1.bin dated 20/02/2013 17:46.

Write this back to your NAND, ensuring you select Jasper 512.

It should boot to normal dashboard.

 

[mnkay]

Done.

Here is the log.


You have reached your dash download limit
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Error: 202 writing block 130
Error: 202 writing block 8A0
Error: 202 writing block 8E0
Done!
in 23:02 min:sec

---------- Post added at 14:27 ---------- Previous post was at 14:26 ----------

Done.

Here is the log.


You have reached your dash download limit
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Error: 202 writing block 130
Error: 202 writing block 8A0
Error: 202 writing block 8E0
Done!
in 23:02 min:sec

Boots to retail 14699

 

[Martin C]

Right, so you're sorted.

delete every other NAND dump you have apart from that one.

Use that dump with your CPU key to make a 16202 RGH image.

Write to your NAND.

 

[mnkay]

Last night I did exactly what you told me to do Martin.

Wrote original 64mb nand. Boots to retail.

Created 16202 512mb updflash and wrote to nand.

Does not Glitch at all. Just sits idle.

So flashed back 64mb to original retail. Created ECC jasper 512 and boots to xell instantly.

Created updflash 512mb and wrote and still no Glitch.

It will not glitch at all on the coolrunner but Xell boots fine.

Not sure where to go from here.

Any help would be appreciated.

 

[Martin C]

"Created 16202 512mb updflash and wrote to nand."

Post the log from this build, including the write log.

 

[mnkay]

===================================================
Friday, February 22, 2013 3:44:05 PM
J-Runner v0.2 Beta (287) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
current dashlaunch 3.06 does not work with 16203
Checking Files
Finished Checking Files
You have reached your dash download limit
You have reached your dash download limit
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Error: 202 writing block 130
Error: 202 writing block 8A0
Error: 202 writing block 8E0
Done!
in 23:02 min:sec
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building retail image

**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
---------------------------------------------------------------
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin image built, info:
---------------------------------------------------------------
Console : Jasper (big block)
NAND size : 64MiB + NAND MU area
Build : Retail
Serial : 304870000000
ConsoleId : 046540000000
MoboSerial: 705993100000000
Mfg Date : 01/05/2010
CPU Key : 8DA6F79ABC6000000000000000000000
1BL Key : DD88AD0C9ED600000000000000000000
DVD Key : B72F086AEB0000000000000000000000
CF LDV : 6
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205
Image is Ready
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Initializing updflash.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Version: 01
Flash Config: 0x00AA3020
Writing Nand
updflash.bin
Error: 202 writing block 130
Error: 202 writing block 8A0
Error: 202 writing block 8E0
Done!
in 23:08 min:sec
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
!You are creating an ecc image and you have selected retail!
* unpacking flash image, ....
Spare Data found, will remove.
Removed
A donor version will be used with this CB
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6750
CB_B: missing
CD (image): 8453
CD (decrypted): 8453
* this image will be valid *only* for: jasper (CB_6751)
* patching SMC...
Patching Jasper version 2.3 SMC at offset 0x12BA
* zero-pairing...
* constructing new image...
* encrypting CB...
* encrypting CD...
* base size: 70000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x11A3F (0x9A40 bytes) CB_A 6750
0x11A40..0x17A3F (0x6000 bytes) CD 8453
0x17A40..0xBFFFF (0xA85C0 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into output\image_00000000.ecc
Version: 01
Flash Config: 0x00AA3020
Writing Nand
image_00000000.ecc
Done!
in 0:28 min:sec
Initializing updflash.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00AA3020
Writing Nand
updflash.bin
Error: 202 writing block 130
Error: 202 writing block 8A0
Error: 202 writing block 8E0
Done!
in 23:08 min:sec
Could not find a part of the path.
===================================================

 

[skillet34]

I know this is a little late but if you check for on board storage with the dvd drive disconnected it does not always show the memory that is why nothing was coming up when you looked. Just some fyi.

 

[mnkay]

Appreciate it. Will make sure next time.


Thanks

 

[Martin C]

With that image written, can you boot to XeLL with the eject button?

I also want to see the updflash.bin.log as requested.

 

[stefanounick]

on that log you created a retail image

 

[Martin C]

on that log you created a retail image

Didn't even see that. No wonder it didn't work.

OP - you need to select 'glitch' in the top right, as per the J-Runner tutorial

 

[mnkay]

--------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building retail image
<enter> key on completion suppressed
data directory overridden from command line to '.\xeBuild\16202\'
per build directory overridden from command line to 'xeBuild\data'
file name overridden from command line to 'C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin'
------ parsing user ini at '.\xeBuild\data\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x1b0 bytes in memory
loading cpukey.txt from .\xeBuild\data\cpukey.txt
CPU Key set to: 0x8DA6F79ABC699EC822B61870D18D6731
setting 1blkey from ini: 0xDD88AD0C9ED669E7B56794FB68563EFA
1BL Key set to: 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983)
xex Key set to: 0x20B185A59D28FDC340583FBB0896BF91 sum: 0x800 (expects: 0x800)
------ parsing ini at '.\xeBuild\16202\_retail.ini' ------
ini version 16202
ini: label [jasperbl] found
found (1) 'cba_6754.bin' crc: 0x4f16775e
found (2) 'cbb_6754.bin' crc: 0x4ac39cb1
found (3) 'cd_6754.bin' crc: 0x1d685a08
found (4) 'ce_1888.bin' crc: 0xff9b60df
found (5) 'cf_16202.bin' crc: 0x752bdf18
found (6) 'cg_16202.bin' crc: 0xd8bfe2ff
ini dictates dual CB for this model
ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0x280c416a
found (2) 'bootanim.xex' crc: 0x0817ebbe
found (3) 'createprofile.xex' crc: 0x29823ae3
found (4) 'dash.xex' crc: 0x40bbd9ab
found (5) 'deviceselector.xex' crc: 0xb982a6d4
found (6) 'gamerprofile.xex' crc: 0xd02321c0
found (7) 'hud.xex' crc: 0xa5493707
found (8) 'huduiskin.xex' crc: 0x77318862
found (9) 'mfgbootlauncher.xex' crc: 0x5ffbc69b
found (10) 'minimediaplayer.xex' crc: 0x38b0f35e
found (11) 'nomni.xexp' crc: 0xe71f0d4c
found (12) 'nomnifwk.xexp' crc: 0x1839b40e
found (13) 'nomnifwm.xexp' crc: 0x761e6e55
found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049
found (15) 'signin.xex' crc: 0x6ab06853
found (16) 'updater.xex' crc: 0x836a0696
found (17) 'vk.xex' crc: 0xbc79c266
found (18) 'xam.xex' crc: 0x2bbd918a
found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (20) 'xenonclatin.xttp' crc: 0x7a507ad1
found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb
found (23) 'ximecore.xex' crc: 0x52eee832
found (24) 'ximedic.xex' crc: 0x1d992bfb
found (25) 'ximedic.xexp' crc: 0xeb032195
ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'fcrt.bin' crc: 0x00000000
found (5) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------
output name overridden to: C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin

------ Checking .\xeBuild\data\nanddump.bin ------
.\xeBuild\data\nanddump.bin file size: 0x4200000
nanddump header checks passed OK!
Loading NAND dump (0x4200000 bytes)...done!
Detecting NAND controller type from dump data...
NAND dump is from a big block machine
NAND dump uses big block controller
parsing dump into user and spare...

**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
bad block at 0x26 (raw offset 0x4e6000), block ignored
bad block at 0x114 (raw offset 0x2394000), block ignored
bad block at 0x11c (raw offset 0x249c000), block ignored
copying nanddump data from block 0x1fd to block 0x11c for file extraction integrity
block 0x11c was remapped to block 0x1fd at remap instance 2
copying nanddump data from block 0x1fe to block 0x114 for file extraction integrity
block 0x114 was remapped to block 0x1fe at remap instance 1
copying nanddump data from block 0x1ff to block 0x26 for file extraction integrity
block 0x26 was remapped to block 0x1ff at remap instance 0
done!
cleaning up stray remaps
done!
--remap summary--
0: source: 0x0026 dest: 0x01ff
1: source: 0x0114 dest: 0x01fe
2: source: 0x011c dest: 0x01fd
-----------------
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0x3be0000! Using if no smc config is provided.
CF slot 0 decrypted ok LDV 0x05 Pairing: 0x061ab5
CF slot 1 decrypted ok LDV 0x06 Pairing: 0x061ab5
setting LDV from image to 6
setting pairing data from image to 0x061ab5
MobileB.dat found at page 0x1c204, size 2048 (0x800) bytes
MobileC.dat found at page 0x1c254, size 512 (0x200) bytes
MobileD.dat found at page 0x1c234, size 2048 (0x800) bytes
MobileE.dat found at page 0x1c200, size 2048 (0x800) bytes
Statistics.settings found at page 0xef000, size 4096 (0x1000) bytes
seeking FSRoot...fsroot found at page 0x1cec0 raw offset 0x6726c00
seeking security files...
crl.bin found in sector 0x3eb size 0xa00...verified! Will use if external file not found.
dae.bin found in sector 0x3e9 size 0x7090...verified! Will use if external file not found.
extended.bin found in sector 0x3be size 0x4000...verified! Will use if external file not found.
secdata.bin found in sector 0x395 size 0x400...verified! Will use if external file not found.
done!
Writing initial header to flash image
------ loading system update container ------
.\xeBuild\16202\su20076000_00000000 found, loading...done!
Read 0xb2f000 bytes to memory
checking container integrity...
header seems valid, version 2.0.16202.00
header hash is OK, checking content hashes...
content hashes seem OK, everything looks good!
extracted SUPD\xboxupd.bin (0x79a50 bytes)
decrypting SUPD\xboxupd.bin\CF_16202.bin (0x4560 bytes)...done!
decrypting SUPD\xboxupd.bin\CG_16202.bin (0x754f0 bytes)...done!
------ Loading bootloaders and required security files ------
reading .\xeBuild\data\smc.bin failed, using smc.bin from nand dump
reset smc load address to 0x1000 size 0x3000
reading .\xeBuild\data\kv.bin failed, using kv.bin from nand dump
reading .\common\cba_6754.bin (0x2000 bytes)
reading .\common\cbb_6754.bin (0x96c0 bytes)
reading .\common\cd_6754.bin (0x5080 bytes)
reading .\common\ce_1888.bin (0x5606a b pad 0x56070 b)
extracted SUPD\xboxupd.bin\CF_16202.bin (0x4560 bytes)
extracted SUPD\xboxupd.bin\CG_16202.bin (0x754f0 bytes)
reading .\xeBuild\data\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
SMC config info:
------------------
Target temps: Cpu: 80øC Gpu: 75øC Edram: 77øC
Max temps : Cpu: 95øC Gpu: 90øC Edram: 92øC
Cpu Fan : (auto)
Gpu Fan : (auto)
MAC Address : 00:25:ae:66:d5:e8
AVRegion : 0x00000100 (NTSC-M)
GameRegion : 0x00ff (NTSC/US)
DVDRegion : 1
resetKey : YYDD
---------------------
Checking for smc config data patches
smc config was not patched
---------------------
done!
patch slot offset reset to: 0x80000
------ Encrypting and finalizing bootloaders ------
encoding smc.bin size 0x3000
SMC checksum: 5b3aed00
known clean SMC found, type: Jasper v4.1(2.03)
clean smc.bin found!
encoding kv.bin size 0x4000
decrypted keyvault has been set for reference
encoding cba_6754.bin size 0x2000
encoding cbb_6754.bin size 0x96c0
CB 6754 seq 0x010c0ad0 type: 0x01 cseq: 0x0c allow: 0x0ad0
expected fuses:
fuseset 00: C0FFFFFFFFFFFFFF
fuseset 01: 0F0F0F0F0F0F0FF0
fuseset 02: 00000000000F0000 (sequence)
fuseset 02: 0000F00000000000 (allow cseq 5)
fuseset 02: 000000F000000000 (allow cseq 7)
fuseset 02: 0000000F00000000 (allow cseq 8)
fuseset 02: 000000000F000000 (allow cseq 10)
fuseset 02: 00000000000F0000 (allow cseq 12)
**dual CB flag detected!**
**15572+ CBB crypto method detected!**
encoding cd_6754.bin size 0x5080
encoding ce_1888.bin size 0x56070
encoding xell-gggggg.bin size 0x0
encoding cf_16202.bin size 0x4560
encoding cg_16202.bin size 0x754f0
encoding patches_fat.bin size 0x0
done!
------ Adding bootloaders to flash image ------
adding smc.bin at raw offset 0x00001000 len 0x3000 (end 0x4000)
adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)
adding cba_6754.bin at raw offset 0x00008000 len 0x2000 (end 0xa000)
adding cbb_6754.bin at raw offset 0x0000a000 len 0x96c0 (end 0x136c0)
adding cd_6754.bin at raw offset 0x000136c0 len 0x5080 (end 0x18740)
adding ce_1888.bin at raw offset 0x00018740 len 0x56070 (end 0x6e7b0)
retail image, skipping xell-gggggg.bin
adding cf_16202.bin at raw offset 0x00080000 len 0x4560 (end 0x84560)
adding cg_16202.bin at raw offset 0x00084560 len 0x754f0 (end 0xa0000, rest in fs)
retail image, skipping patches_fat.bin
Writing zeropair CG patch slot overflow data to sysupdate.xexp1
at raw offset 0x2b80000 len 0x00059a50 (end: 0x02bd9a50)...done!
------ adding 25 firmware files ------
extracted SUPD\aac.xexp (0x14000 bytes) (crc32: 0x280c416a ini: 0x280c416a)
adding as aac.xexp1 at raw offset 0x2bd9a50 len 0x00014000 (end 0x02beda50)
extracted SUPD\bootanim.xex (0x61000 bytes) (crc32: 0x0817ebbe ini: 0x0817ebbe)
adding as bootanim.xex at raw offset 0x2bf0000 len 0x00061000 (end 0x02c51000)
extracted SUPD\createprofile.xex (0xc000 bytes) (crc32: 0x29823ae3 ini: 0x29823ae3)
adding as createprofile.xex at raw offset 0x2c51000 len 0x0000c000 (end 0x02c5d000)
extracted SUPD\dash.xex (0x59b000 bytes) (crc32: 0x40bbd9ab ini: 0x40bbd9ab)
adding as dash.xex at raw offset 0x2c60000 len 0x0059b000 (end 0x031fb000)
extracted SUPD\deviceselector.xex (0xa000 bytes) (crc32: 0xb982a6d4 ini: 0xb982a6d4)
adding as deviceselector.xex at raw offset 0x31fb000 len 0x0000a000 (end 0x03205000)
extracted SUPD\gamerprofile.xex (0x1b000 bytes) (crc32: 0xd02321c0 ini: 0xd02321c0)
adding as gamerprofile.xex at raw offset 0x3206000 len 0x0001b000 (end 0x03221000)
extracted SUPD\hud.xex (0x1d000 bytes) (crc32: 0xa5493707 ini: 0xa5493707)
adding as hud.xex at raw offset 0x3223000 len 0x0001d000 (end 0x03240000)
extracted SUPD\huduiskin.xex (0x14000 bytes) (crc32: 0x77318862 ini: 0x77318862)
adding as huduiskin.xex at raw offset 0x3241000 len 0x00014000 (end 0x03255000)
extracted SUPD\mfgbootlauncher.xex (0x8000 bytes) (crc32: 0x5ffbc69b ini: 0x5ffbc69b)
adding as mfgbootlauncher.xex at raw offset 0x3258000 len 0x00008000 (end 0x03260000)
extracted SUPD\minimediaplayer.xex (0xb000 bytes) (crc32: 0x38b0f35e ini: 0x38b0f35e)
adding as minimediaplayer.xex at raw offset 0x3260000 len 0x0000b000 (end 0x0326b000)
extracted SUPD\nomni.xexp (0xe000 bytes) (crc32: 0xe71f0d4c ini: 0xe71f0d4c)
adding as nomni.xexp1 at raw offset 0x326b000 len 0x0000e000 (end 0x03279000)
extracted SUPD\nomnifwk.xexp (0x2000 bytes) (crc32: 0x1839b40e ini: 0x1839b40e)
adding as nomnifwk.xexp1 at raw offset 0x327a000 len 0x00002000 (end 0x0327c000)
extracted SUPD\nomnifwm.xexp (0x5000 bytes) (crc32: 0x761e6e55 ini: 0x761e6e55)
adding as nomnifwm.xexp1 at raw offset 0x327e000 len 0x00005000 (end 0x03283000)
extracted SUPD\SegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0xe0ee6049 ini: 0xe0ee6049)
adding as SegoeXbox-Light.xtt at raw offset 0x3285000 len 0x00006000 (end 0x0328b000)
extracted SUPD\signin.xex (0x16000 bytes) (crc32: 0x6ab06853 ini: 0x6ab06853)
adding as signin.xex at raw offset 0x328e000 len 0x00016000 (end 0x032a4000)
extracted SUPD\updater.xex (0x7000 bytes) (crc32: 0x836a0696 ini: 0x836a0696)
adding as updater.xex at raw offset 0x32a6000 len 0x00007000 (end 0x032ad000)
extracted SUPD\vk.xex (0xb000 bytes) (crc32: 0xbc79c266 ini: 0xbc79c266)
adding as vk.xex at raw offset 0x32af000 len 0x0000b000 (end 0x032ba000)
extracted SUPD\xam.xex (0x24e000 bytes) (crc32: 0x2bbd918a ini: 0x2bbd918a)
adding as xam.xex at raw offset 0x32bb000 len 0x0024e000 (end 0x03509000)
reading .\xeBuild\16202\xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)
adding as xenonclatin.xtt at raw offset 0x350a000 len 0x0011b000 (end 0x03625000)
extracted SUPD\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)
adding as xenonclatin.xttp1 at raw offset 0x3627000 len 0x00018000 (end 0x0363f000)
reading .\xeBuild\16202\xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)
adding as xenonjklatin.xtt at raw offset 0x3640000 len 0x001a8000 (end 0x037e8000)
extracted SUPD\xenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb ini: 0xe2adddfb)
adding as xenonjklatin.xttp1 at raw offset 0x37e8000 len 0x00007000 (end 0x037ef000)
extracted SUPD\ximecore.xex (0x17000 bytes) (crc32: 0x52eee832 ini: 0x52eee832)
adding as ximecore.xex at raw offset 0x37ef000 len 0x00017000 (end 0x03806000)
reading .\xeBuild\16202\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)
adding as ximedic.xex at raw offset 0x3807000 len 0x00090000 (end 0x03897000)
extracted SUPD\ximedic.xexp (0x2800 bytes) (crc32: 0xeb032195 ini: 0xeb032195)
adding as ximedic.xexp1 at raw offset 0x3898000 len 0x00002800 (end 0x0389a800)
------ adding 5 security files ------
<- Processing crl.bin ->
reading .\xeBuild\data\crl.bin (0xa00 bytes)
crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success!
adding as crl.bin at raw offset 0x389c000 len 0x00000a00 (end 0x0389ca00)
<- Processing dae.bin ->
reading .\xeBuild\data\dae.bin (0xad30 bytes)
dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key...
success!
adding as dae.bin at raw offset 0x38a0000 len 0x0000ad30 (end 0x038aad30)
<- Processing extended.bin ->
reading .\xeBuild\data\extended.bin (0x4000 bytes)
adding as extended.bin at raw offset 0x38ac000 len 0x00004000 (end 0x038b0000)
<- Processing fcrt.bin ->
fcrt.bin not found and not required by keyvault, skipped
<- Processing secdata.bin ->
reading .\xeBuild\data\secdata.bin (0x400 bytes)
adding as secdata.bin at raw offset 0x38b0000 len 0x00000400 (end 0x038b0400)
------ checking for Mobile*.dat ------
MobileB.dat found, adding from nanddump.bin
adding MobileB.dat as type 0x31 at raw offset 0x38c0000 len 0x800 (end 0x38c0800)
MobileC.dat found, adding from nanddump.bin
adding MobileC.dat as type 0x32 at raw offset 0x38c0800 len 0x200 (end 0x38c0a00)
MobileD.dat found, adding from nanddump.bin
adding MobileD.dat as type 0x33 at raw offset 0x38c1000 len 0x800 (end 0x38c1800)
MobileE.dat found, adding from nanddump.bin
adding MobileE.dat as type 0x34 at raw offset 0x38c1800 len 0x800 (end 0x38c2000)
Statistics.settings found, adding from nanddump.bin
adding Statistics.settings at raw offset 0x3bc0000 len 0x1000 (end 0x3bc1000)
------ adding smc_config.bin ------
adding smc config to offset 0x03be0000, len 0x400
------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image offset 0x38e0000 len 0x4000 (end 0x38e4000)...done!
fixing up big block LBA numbers in spare...done!
calculating ECD bytes and assembling raw image...done!
remapping 3 blocks
copying 0x21000 bytes of LBA 0x26 to block 0x1ff...zero fill origin...
dest block is empty, fixing up LBA and ECD...done!
copying 0x21000 bytes of LBA 0x114 to block 0x1fe...zero fill origin...
dest block is empty, fixing up LBA and ECD...done!
copying 0x21000 bytes of LBA 0x11c to block 0x1fd...zero fill origin...
dest block is empty, fixing up LBA and ECD...done!
done!
writing file 'C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin' to disk...done!
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin written OK
---------------------------------------------------------------
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin image built, info:
---------------------------------------------------------------
Console : Jasper (big block)
NAND size : 64MiB + NAND MU area
Build : Retail
Serial : 304870000000
ConsoleId : 046540000000
MoboSerial: 7059930000000000
Mfg Date : 01/05/2010
CPU Key : 8DA6F79ABC6000000000000000000000
1BL Key : DD88AD0C9ED000000000000000000000
DVD Key : B72F0800000000000000000000000000
CF LDV : 6
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------

 

[Martin C]

As Stef mentioned

Build : Retail

Why are you trying to build a 16202 retail image?

 

[mnkay]

Damn... the easy mistakes!

Flashed it back to stock with original dump and forgot to change it to Glitch when building 16202.

Did what you suggested and you were 100% correct.

Hats off guys and appreciate all your help.

Things learned...

Pay attention to flash config

Do not test for MU when DVD drive is off

Ask before proceeding




Thanks

---------- Post added at 06:55 ---------- Previous post was at 06:54 ----------

Damn... the easy mistakes!

Flashed it back to stock with original dump and forgot to change it to Glitch when building 16202.

Did what you suggested and you were 100% correct.

Hats off guys and appreciate all your help.

Things learned...

Pay attention to flash config

Do not test for MU when DVD drive is off

Ask before proceeding




Thanks

Oh yeah, works perfectly and glitches like it should.

 

[Martin C]

No worries - I'm only pleased your mistake was easily recoverable