Team-Xecuter Community
Hey guys,
I am new here and need some help on a Jasper RGH 1 16mb with bad blocks.
I did not check the Jasper at first to see if it was a big block or small block as you can see in teh log. Stopped the read and powered up console to verify it was a 16 mb and sure enough, no onboard so assumption was right.
I then proceeded to read and bad blocks came up. I stopped the read and checked wiring, solder points.
Still same. So I tried to read as a 64mb and still errors and bad blocks.
Pretty well tried everything, different Jrunner, different PC and still have bad blocks and ultmately prevents the Jasper from powering up at all.
I flash the updflash bin file and wont boot. Flash xell/ecc boots everytime instantly. Falsh to stock and boots perfectly.
I have done many Jtags/RGH and usally depend on Jrunner to rebuild but does not rebuild the blocks in this instance.
I am an electronics technician and have extensive knowledge and expertise in soldering/diagnostics but do not have much experince in the software/nand building department.
I will apreciate any help or someone who could possibly help rebuild a working nand/Updflash bin file that I can flash to my Jasper.
Here is the log... I have replaced the important info KV/CPU etc with zeros to protect some info.
J-Runner v0.2 Beta (284) Started
Checking Files
Finished Checking Files
Finished Checking Files
Finished Checking Files
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Done!
in 5:11 min:sec
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Nand Initialization Finished
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Win32Error
Win32Error:No more bytes!
Version: 01
Flash Config: 0x00000000
Can not Continue
Could not find a part of the path.
===================================================
Wednesday, February 20, 2013 3:30:17 PM
J-Runner v0.2 Beta (284) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Finished Checking Files
Version: 00
Wrong Version.
Finished Checking Files
===================================================
Wednesday, February 20, 2013 3:32:31 PM
J-Runner v0.2 Beta (284) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Finished Checking Files
Finished Checking Files
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Win32Error
Win32Error:No more bytes!
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Done!
in 3:28 min:sec
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Nand Initialization Finished
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Done!
in 3:28 min:sec
Comparing...
Bad Block ID @ 0x0000 [Offset: 0x0]
Bad Block ID @ 0x0001 [Offset: 0x4200]
Bad Block ID @ 0x0002 [Offset: 0x8400]
Bad Block ID @ 0x0003 [Offset: 0xC600]
Bad Block ID @ 0x0004 [Offset: 0x10800]
Bad Block ID @ 0x0005 [Offset: 0x14A00]
Bad Block ID @ 0x0006 [Offset: 0x18C00]
Bad Block ID @ 0x0007 [Offset: 0x1CE00]
Bad Block ID @ 0x0008 [Offset: 0x21000]
Bad Block ID @ 0x0009 [Offset: 0x25200]
Bad Block ID @ 0x000A [Offset: 0x29400]
Bad Block ID @ 0x000B [Offset: 0x2D600]
Bad Block ID @ 0x000C [Offset: 0x31800]
Bad Block ID @ 0x000D [Offset: 0x35A00]
Bad Block ID @ 0x000E [Offset: 0x39C00]
Bad Block ID @ 0x000F [Offset: 0x3DE00]
Bad Block ID @ 0x0010 [Offset: 0x42000]
Bad Block ID @ 0x0011 [Offset: 0x46200]
Bad Block ID @ 0x0012 [Offset: 0x4A400]
Bad Block ID @ 0x0013 [Offset: 0x4E600]
Bad Block ID @ 0x0014 [Offset: 0x52800]
Bad Block ID @ 0x0015 [Offset: 0x56A00]
Bad Block ID @ 0x0016 [Offset: 0x5AC00]
Bad Block ID @ 0x0017 [Offset: 0x5EE00]
Bad Block ID @ 0x0018 [Offset: 0x63000]
Bad Block ID @ 0x0019 [Offset: 0x67200]
Bad Block ID @ 0x001A [Offset: 0x6B400]
Bad Block ID @ 0x001B [Offset: 0x6F600]
Bad Block ID @ 0x001C [Offset: 0x73800]
Bad Block ID @ 0x001D [Offset: 0x77A00]
Bad Block ID @ 0x001E [Offset: 0x7BC00]
Bad Block ID @ 0x001F [Offset: 0x7FE00]
Too Many Bad Blocks
Bad Block ID @ 0x0000 [Offset: 0x0]
Bad Block ID @ 0x0001 [Offset: 0x4200]
Bad Block ID @ 0x0002 [Offset: 0x8400]
Bad Block ID @ 0x0003 [Offset: 0xC600]
Bad Block ID @ 0x0004 [Offset: 0x10800]
Bad Block ID @ 0x0005 [Offset: 0x14A00]
Bad Block ID @ 0x0006 [Offset: 0x18C00]
Bad Block ID @ 0x0007 [Offset: 0x1CE00]
Bad Block ID @ 0x0008 [Offset: 0x21000]
Bad Block ID @ 0x0009 [Offset: 0x25200]
Bad Block ID @ 0x000A [Offset: 0x29400]
Bad Block ID @ 0x000B [Offset: 0x2D600]
Bad Block ID @ 0x000C [Offset: 0x31800]
Bad Block ID @ 0x000D [Offset: 0x35A00]
Bad Block ID @ 0x000E [Offset: 0x39C00]
Bad Block ID @ 0x000F [Offset: 0x3DE00]
Bad Block ID @ 0x0010 [Offset: 0x42000]
Bad Block ID @ 0x0011 [Offset: 0x46200]
Bad Block ID @ 0x0012 [Offset: 0x4A400]
Bad Block ID @ 0x0013 [Offset: 0x4E600]
Bad Block ID @ 0x0014 [Offset: 0x52800]
Bad Block ID @ 0x0015 [Offset: 0x56A00]
Bad Block ID @ 0x0016 [Offset: 0x5AC00]
Bad Block ID @ 0x0017 [Offset: 0x5EE00]
Bad Block ID @ 0x0018 [Offset: 0x63000]
Bad Block ID @ 0x0019 [Offset: 0x67200]
Bad Block ID @ 0x001A [Offset: 0x6B400]
Bad Block ID @ 0x001B [Offset: 0x6F600]
Bad Block ID @ 0x001C [Offset: 0x73800]
Bad Block ID @ 0x001D [Offset: 0x77A00]
Bad Block ID @ 0x001E [Offset: 0x7BC00]
Bad Block ID @ 0x001F [Offset: 0x7FE00]
Too Many Bad Blocks
Nands are the same
Too Many Bad Blocks
* unpacking flash image, ....
Spare Data found, will remove.
Removed
A donor version will be used with this CB
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6750
CB_B: missing
CD (image): 8453
CD (decrypted): 8453
* this image will be valid *only* for: jasper (CB_6751)
* patching SMC...
Patching Jasper version 2.3 SMC at offset 0x12BA
* zero-pairing...
* constructing new image...
* encrypting CB...
* encrypting CD...
* base size: 70000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x11A3F (0x9A40 bytes) CB_A 6750
0x11A40..0x17A3F (0x6000 bytes) CD 8453
0x17A40..0xBFFFF (0xA85C0 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into output\image_00000000.ecc
Version: 01
Flash Config: 0x00AA3020
Writing Nand
image_00000000.ecc
Done!
in 0:18 min:sec
Programming Coolrunner
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\common\xsvf\jasper.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\common\xsvf\jasper.xsvf
Sending Out Packets .........
Success
Initializing nanddump1.bin..
Too Many Bad Blocks
CpuKey is Correct
Added Key to Database
Nand Initialization Finished
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
***** WARNING: nanddump.bin has a bad LBA at block 0x7f (raw offset 0x105f000), block LBA ignored
An unhandled exception 0xC0000005 has occured, exiting...
Failed
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
***** WARNING: nanddump.bin has a bad LBA at block 0x7f (raw offset 0x105f000), block LBA ignored
An unhandled exception 0xC0000005 has occured, exiting...
Failed
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
***** WARNING: nanddump.bin has a bad LBA at block 0x7f (raw offset 0x105f000), block LBA ignored
An unhandled exception 0xC0000005 has occured, exiting...
Failed
Initializing nanddump1.bin..
Too Many Bad Blocks
Nand Initialization Finished
Version: 01
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Error: 202 writing block 130
Done!
in 5:49 min:sec
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Done!
in 5:11 min:sec
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Cancelled
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building retail image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
***** WARNING: nanddump.bin has a bad LBA at block 0x7f (raw offset 0x105f000), block LBA ignored
An unhandled exception 0xC0000005 has occured, exiting...
Failed
Value cannot be null.
Parameter name: start
Version: 01
Flash Config: 0x00AA3020
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Error: 250 reading block 8A0
Error: 210 reading block 8A1
Error: 210 reading block 8A2
Error: 210 reading block 8A3
Error: 210 reading block 8A4
Error: 210 reading block 8A5
Error: 210 reading block 8A6
Error: 210 reading block 8A7
Error: 250 reading block 8E0
Error: 210 reading block 8E1
Error: 210 reading block 8E2
Error: 210 reading block 8E3
Error: 210 reading block 8E4
Error: 210 reading block 8E5
Error: 210 reading block 8E6
Error: 210 reading block 8E7
Done!
in 20:42 min:sec
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building retail image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
---------------------------------------------------------------
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin image built, info:
---------------------------------------------------------------
Console : Jasper
NAND size : 16MiB
Build : Retail
Serial : 304876000000
ConsoleId : 046540000000
MoboSerial: 705993120000000
Mfg Date : 01/05/2010
CPU Key : 8DA6F79ABC699EC00000000000000000
1BL Key : DD88AD0C9ED669E00000000000000000
DVD Key : B72F086AEBA559000000000000000000
CF LDV : 6
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205
Image is Ready
!You are creating an ecc image and you have selected retail!
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6754
CB_B: 6754
CD (image): 6754
CD (decrypted): 9452
* checking required versions...
ok
* patching SMC...
Patching Jasper version 2.3 SMC at offset 0x12BA
* Replacing CD...
* XOR HACK NEEDED FOR CB 6754
File C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\common\CB\CB_B.6754.bin not found!
Failed to open CB_B.6754.bin
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin image built, info:
---------------------------------------------------------------
Console : Jasper
NAND size : 16MiB
Build : Glitch
Xell : power on console with console eject button
Serial : 304876000000
ConsoleId : 046540000000
MoboSerial: 70599310000000000
Mfg Date : 01/05/2010
CPU Key : 8DA6F79ABC699EC00000000000000000
1BL Key : DD88AD0C9ED669E00000000000000000
DVD Key : B72F086AEBA559000000000000000000
CF LDV : 6
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205
Image is Ready
Initializing updflash.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Version: 01
Flash Config: 0x00AA3020
Writing Nand
updflash.bin
Error: 202 writing block 130
Done!
in 5:48 min:sec
Version: 01
Flash Config: 0x00AA3020
Writing Nand
image_00000000.ecc
Done!
in 0:28 min:sec
Version: 01
Flash Config: 0x00AA3020
Writing Nand
updflash.bin
Error: 202 writing block 130
Done!
in 5:48 min:sec
I am new here and need some help on a Jasper RGH 1 16mb with bad blocks.
I did not check the Jasper at first to see if it was a big block or small block as you can see in teh log. Stopped the read and powered up console to verify it was a 16 mb and sure enough, no onboard so assumption was right.
I then proceeded to read and bad blocks came up. I stopped the read and checked wiring, solder points.
Still same. So I tried to read as a 64mb and still errors and bad blocks.
Pretty well tried everything, different Jrunner, different PC and still have bad blocks and ultmately prevents the Jasper from powering up at all.
I flash the updflash bin file and wont boot. Flash xell/ecc boots everytime instantly. Falsh to stock and boots perfectly.
I have done many Jtags/RGH and usally depend on Jrunner to rebuild but does not rebuild the blocks in this instance.
I am an electronics technician and have extensive knowledge and expertise in soldering/diagnostics but do not have much experince in the software/nand building department.
I will apreciate any help or someone who could possibly help rebuild a working nand/Updflash bin file that I can flash to my Jasper.
Here is the log... I have replaced the important info KV/CPU etc with zeros to protect some info.
J-Runner v0.2 Beta (284) Started
Checking Files
Finished Checking Files
Finished Checking Files
Finished Checking Files
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Done!
in 5:11 min:sec
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Nand Initialization Finished
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Win32Error
Win32Error:No more bytes!
Version: 01
Flash Config: 0x00000000
Can not Continue
Could not find a part of the path.
===================================================
Wednesday, February 20, 2013 3:30:17 PM
J-Runner v0.2 Beta (284) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Finished Checking Files
Version: 00
Wrong Version.
Finished Checking Files
===================================================
Wednesday, February 20, 2013 3:32:31 PM
J-Runner v0.2 Beta (284) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Finished Checking Files
Finished Checking Files
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Win32Error
Win32Error:No more bytes!
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Done!
in 3:28 min:sec
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Nand Initialization Finished
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Done!
in 3:28 min:sec
Comparing...
Bad Block ID @ 0x0000 [Offset: 0x0]
Bad Block ID @ 0x0001 [Offset: 0x4200]
Bad Block ID @ 0x0002 [Offset: 0x8400]
Bad Block ID @ 0x0003 [Offset: 0xC600]
Bad Block ID @ 0x0004 [Offset: 0x10800]
Bad Block ID @ 0x0005 [Offset: 0x14A00]
Bad Block ID @ 0x0006 [Offset: 0x18C00]
Bad Block ID @ 0x0007 [Offset: 0x1CE00]
Bad Block ID @ 0x0008 [Offset: 0x21000]
Bad Block ID @ 0x0009 [Offset: 0x25200]
Bad Block ID @ 0x000A [Offset: 0x29400]
Bad Block ID @ 0x000B [Offset: 0x2D600]
Bad Block ID @ 0x000C [Offset: 0x31800]
Bad Block ID @ 0x000D [Offset: 0x35A00]
Bad Block ID @ 0x000E [Offset: 0x39C00]
Bad Block ID @ 0x000F [Offset: 0x3DE00]
Bad Block ID @ 0x0010 [Offset: 0x42000]
Bad Block ID @ 0x0011 [Offset: 0x46200]
Bad Block ID @ 0x0012 [Offset: 0x4A400]
Bad Block ID @ 0x0013 [Offset: 0x4E600]
Bad Block ID @ 0x0014 [Offset: 0x52800]
Bad Block ID @ 0x0015 [Offset: 0x56A00]
Bad Block ID @ 0x0016 [Offset: 0x5AC00]
Bad Block ID @ 0x0017 [Offset: 0x5EE00]
Bad Block ID @ 0x0018 [Offset: 0x63000]
Bad Block ID @ 0x0019 [Offset: 0x67200]
Bad Block ID @ 0x001A [Offset: 0x6B400]
Bad Block ID @ 0x001B [Offset: 0x6F600]
Bad Block ID @ 0x001C [Offset: 0x73800]
Bad Block ID @ 0x001D [Offset: 0x77A00]
Bad Block ID @ 0x001E [Offset: 0x7BC00]
Bad Block ID @ 0x001F [Offset: 0x7FE00]
Too Many Bad Blocks
Bad Block ID @ 0x0000 [Offset: 0x0]
Bad Block ID @ 0x0001 [Offset: 0x4200]
Bad Block ID @ 0x0002 [Offset: 0x8400]
Bad Block ID @ 0x0003 [Offset: 0xC600]
Bad Block ID @ 0x0004 [Offset: 0x10800]
Bad Block ID @ 0x0005 [Offset: 0x14A00]
Bad Block ID @ 0x0006 [Offset: 0x18C00]
Bad Block ID @ 0x0007 [Offset: 0x1CE00]
Bad Block ID @ 0x0008 [Offset: 0x21000]
Bad Block ID @ 0x0009 [Offset: 0x25200]
Bad Block ID @ 0x000A [Offset: 0x29400]
Bad Block ID @ 0x000B [Offset: 0x2D600]
Bad Block ID @ 0x000C [Offset: 0x31800]
Bad Block ID @ 0x000D [Offset: 0x35A00]
Bad Block ID @ 0x000E [Offset: 0x39C00]
Bad Block ID @ 0x000F [Offset: 0x3DE00]
Bad Block ID @ 0x0010 [Offset: 0x42000]
Bad Block ID @ 0x0011 [Offset: 0x46200]
Bad Block ID @ 0x0012 [Offset: 0x4A400]
Bad Block ID @ 0x0013 [Offset: 0x4E600]
Bad Block ID @ 0x0014 [Offset: 0x52800]
Bad Block ID @ 0x0015 [Offset: 0x56A00]
Bad Block ID @ 0x0016 [Offset: 0x5AC00]
Bad Block ID @ 0x0017 [Offset: 0x5EE00]
Bad Block ID @ 0x0018 [Offset: 0x63000]
Bad Block ID @ 0x0019 [Offset: 0x67200]
Bad Block ID @ 0x001A [Offset: 0x6B400]
Bad Block ID @ 0x001B [Offset: 0x6F600]
Bad Block ID @ 0x001C [Offset: 0x73800]
Bad Block ID @ 0x001D [Offset: 0x77A00]
Bad Block ID @ 0x001E [Offset: 0x7BC00]
Bad Block ID @ 0x001F [Offset: 0x7FE00]
Too Many Bad Blocks
Nands are the same
Too Many Bad Blocks
* unpacking flash image, ....
Spare Data found, will remove.
Removed
A donor version will be used with this CB
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6750
CB_B: missing
CD (image): 8453
CD (decrypted): 8453
* this image will be valid *only* for: jasper (CB_6751)
* patching SMC...
Patching Jasper version 2.3 SMC at offset 0x12BA
* zero-pairing...
* constructing new image...
* encrypting CB...
* encrypting CD...
* base size: 70000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x11A3F (0x9A40 bytes) CB_A 6750
0x11A40..0x17A3F (0x6000 bytes) CD 8453
0x17A40..0xBFFFF (0xA85C0 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into output\image_00000000.ecc
Version: 01
Flash Config: 0x00AA3020
Writing Nand
image_00000000.ecc
Done!
in 0:18 min:sec
Programming Coolrunner
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\common\xsvf\jasper.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\common\xsvf\jasper.xsvf
Sending Out Packets .........
Success
Initializing nanddump1.bin..
Too Many Bad Blocks
CpuKey is Correct
Added Key to Database
Nand Initialization Finished
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
***** WARNING: nanddump.bin has a bad LBA at block 0x7f (raw offset 0x105f000), block LBA ignored
An unhandled exception 0xC0000005 has occured, exiting...
Failed
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
***** WARNING: nanddump.bin has a bad LBA at block 0x7f (raw offset 0x105f000), block LBA ignored
An unhandled exception 0xC0000005 has occured, exiting...
Failed
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
***** WARNING: nanddump.bin has a bad LBA at block 0x7f (raw offset 0x105f000), block LBA ignored
An unhandled exception 0xC0000005 has occured, exiting...
Failed
Initializing nanddump1.bin..
Too Many Bad Blocks
Nand Initialization Finished
Version: 01
Flash Config: 0x00AA3020
Writing Nand
nanddump1.bin
Error: 202 writing block 130
Done!
in 5:49 min:sec
Version: 01
Flash Config: 0x00AA3020
CB Version: 6751
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Done!
in 5:11 min:sec
Reading Nand to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Cancelled
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building retail image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
***** WARNING: nanddump.bin has a bad LBA at block 0x7f (raw offset 0x105f000), block LBA ignored
An unhandled exception 0xC0000005 has occured, exiting...
Failed
Value cannot be null.
Parameter name: start
Version: 01
Flash Config: 0x00AA3020
Reading Nand
Error: 250 reading block 130
Error: 210 reading block 131
Error: 210 reading block 132
Error: 210 reading block 133
Error: 210 reading block 134
Error: 210 reading block 135
Error: 210 reading block 136
Error: 210 reading block 137
Error: 250 reading block 8A0
Error: 210 reading block 8A1
Error: 210 reading block 8A2
Error: 210 reading block 8A3
Error: 210 reading block 8A4
Error: 210 reading block 8A5
Error: 210 reading block 8A6
Error: 210 reading block 8A7
Error: 250 reading block 8E0
Error: 210 reading block 8E1
Error: 210 reading block 8E2
Error: 210 reading block 8E3
Error: 210 reading block 8E4
Error: 210 reading block 8E5
Error: 210 reading block 8E6
Error: 210 reading block 8E7
Done!
in 20:42 min:sec
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building retail image
**************** WARNING *************************
nanddump.bin has NAND memory unit data, make
sure you back up any important data off the
internal MU before flashing a new image!
****************************************************
---------------------------------------------------------------
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin image built, info:
---------------------------------------------------------------
Console : Jasper
NAND size : 16MiB
Build : Retail
Serial : 304876000000
ConsoleId : 046540000000
MoboSerial: 705993120000000
Mfg Date : 01/05/2010
CPU Key : 8DA6F79ABC699EC00000000000000000
1BL Key : DD88AD0C9ED669E00000000000000000
DVD Key : B72F086AEBA559000000000000000000
CF LDV : 6
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205
Image is Ready
!You are creating an ecc image and you have selected retail!
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6754
CB_B: 6754
CD (image): 6754
CD (decrypted): 9452
* checking required versions...
ok
* patching SMC...
Patching Jasper version 2.3 SMC at offset 0x12BA
* Replacing CD...
* XOR HACK NEEDED FOR CB 6754
File C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\common\CB\CB_B.6754.bin not found!
Failed to open CB_B.6754.bin
Load Files Initiliazation Finished
16202
Started Creation of the 16202 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.06.555
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205\updflash.bin image built, info:
---------------------------------------------------------------
Console : Jasper
NAND size : 16MiB
Build : Glitch
Xell : power on console with console eject button
Serial : 304876000000
ConsoleId : 046540000000
MoboSerial: 70599310000000000
Mfg Date : 01/05/2010
CPU Key : 8DA6F79ABC699EC00000000000000000
1BL Key : DD88AD0C9ED669E00000000000000000
DVD Key : B72F086AEBA559000000000000000000
CF LDV : 6
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Documents and Settings\me\Desktop\Jtag\J runner\J-Runner v02 Beta (283) Core Pack\304876700205
Image is Ready
Initializing updflash.bin..
CpuKey is Correct
Key already Exists
Nand Initialization Finished
Version: 01
Flash Config: 0x00AA3020
Writing Nand
updflash.bin
Error: 202 writing block 130
Done!
in 5:48 min:sec
Version: 01
Flash Config: 0x00AA3020
Writing Nand
image_00000000.ecc
Done!
in 0:28 min:sec
Version: 01
Flash Config: 0x00AA3020
Writing Nand
updflash.bin
Error: 202 writing block 130
Done!
in 5:48 min:sec