LITEON 0225 Need help, last resort to ask for help.

[UminekoRox]

I'm not particularly happy to have to ask for help because I've tried nearly everything, but there isn't a straight answer/I just can't find it.

Here's my situation:
The guy from www.sick360mods.com modded my Xbox 360 with LT + 2.0.

Time passed, LT + 3.0 comes out, didn't want to spend money/shipping. (His rates are reasonable, but I'm a cheapo.)

I took apart my Xbox 360, got the drive key, wanted to write firmware, but no success.

I tried EVERY method for the Slim in the Jungle Flasher tutorial, and looked online through the forums/tuts for answers, just can't find anything useful.

I'm pretty sure he replaced the PCB/modded it in some way, or else he wouldn't have been able to flash it.

So, what I'm asking is this: What the hell do I do?

I have X360USB Pro, CK3i, CK3 Probe, the adapters and everything else needed.

My Xbox 360 is a Slim.

Thank you for your time and help.

 

[InfamousJoe]

Do you have a Winbond or MXIC chip in your dvd drive?

 

[UminekoRox]

Do you have a Winbond or MXIC chip in your dvd drive?

I was about to edit my post about that, Winbond.

 

[InfamousJoe]

And is there a small hole drilled in the chip?

 

[UminekoRox]

And is there a small hole drilled in the chip?

I tried looking for that, could you give me a picture to verify?

 

[InfamousJoe]

Here you go. It may not have the scratch marks on it, but you should see a hole still.

 

[UminekoRox]

Here you go. It may not have the scratch marks on it, but you should see a hole still.

Yeah, it has that.

Was that the hole I was supposed to touch the CK3 Pro with?

 

[InfamousJoe]

NO! Do not touch any part of your flashing equipment there. Have you already dumped the firmware?

 

[UminekoRox]

NO! Do not touch any part of your flashing equipment there. Have you already dumped the firmware?

He was supposed to email it to me... ^_^"

My mom sent it and I suppose she didn't include any emails.

The drive key should be enough to at least flash it with stock and LT, correct?

 

[InfamousJoe]

Yes, but you should do a full dump of the firmware before you go any further. Follow the Jungleflasher tut and make sure to say "no" when it asks if you want to unlock the drive. This will get you a good dump. Do you have rubbing alcohol?

 

[Utmad]

Please check with others but I am sure you are supposed to put isopronol alcohol on the hole to allow it to unlock so you can program it, I know it sounds weird but I am sure this is what needs to be done.

 

[UminekoRox]

Yes, but you should do a full dump of the firmware before you go any further. Follow the Jungleflasher tut and make sure to say "no" when it asks if you want to unlock the drive. This will get you a good dump. Do you have rubbing alcohol?

I heard about the rubbing alcohol thing, I have some.
I heard the CK3 Pro works on it too.
Which hole, the one on the chip?

 

[Utmad]

Yes the hole that is drilled in the chip, but please check with others

 

[UminekoRox]

I heard about the rubbing alcohol thing, I have some.
I heard the CK3 Pro works on it too.
Which hole, the one on the chip?

Edit: Forgot to mention that I meant that, I already did the full dump if that's the case.

 

[UminekoRox]

I did the alcohol method again, peeled off the film and it worked perfectly, thanks guys!