LITEON 74850 Need help, Serial Data is bad

[Jakusza]

Hi there,

I just bought:
- X360USB PRO Connectivity Kit
- Probe 3
- Molex
- Maximus xTractor v.2

I got problem. Everytime I try to get key from my Liteon 74850 i got Serial Data is Bad. Maybe I am doing something wrong. I've tried about 30 times, with few combinations, also updated firmware on usbpro. Check pictures...

I am working on:

JungleFlasher v0.1.87 Beta (277)
Sony Vaio VPCEB1m1e Intel® HM55 Express

And doing it that way:
- start pc with f8, no drivers sign
- turn on maximus, take drive 1/2 out
- wait untill pc ready, plug maximus, usb x360, usb x360 2nd to pc. usbx360 is 2x green led.
- start as administrator jungleflasher, usbx360 is 1x green, 1x red.
- check all 1 - 8 (from tutorial), go dvdkey (5sec), turn off maximus, stick probe to 707, click ok... ERROR

 

[talby71]

probing wrong point should be MPX01

 

[diaboliq20]

also xtractor pro has issues powering drives with x360USB for some reason - a lot of folks have this issues - I would get a ck3 lite or pro

 

[cha0sriderx]

Look at the guide inside the jf documents folder and it will show u where MPX01 is and ull be probing that instead of the one ur doing now.

 

[xbox360 hacker]

The usb doesn't need connected either

 

[talby71]

maybe have a look at this tutorial , you are trying the old (wrong) way
http://team-xecuter.com/forums/showthread.php?t=66257

 

[diaboliq20]

HERE is the tutorial link for your drive
Edit: Keyboard racers unite Talby lol

---------- Post added at 11:54 ---------- Previous post was at 11:53 ----------

also the x360USB does not require anything other than the USB and SATA to be connected to it

 

[talby71]

just beat ya...lol

you have the extra power cable connected , only needed if you have old usb with low voltage

 

[Jakusza]

After 20x of doing it wrong I just plugged everything everywhere...

Ok let me check upper solutions...

 

[Jakusza]

Ok. Extracted. But now another problem:

 

[talby71]

try removing the usb from your extractor..not required in Pic 1

 

[N.E.Modz]

Ok. Extracted. But now another problem:

Link To Image

did you switch off then on in within a second when clicking liteon erase?

 

[Jakusza]

I got message, that I don't have iXtreme (LTPlus-025v1.91), so i dl from fileserve LTPlus-025v1.91, and follow:

firmware toll -> load my dummy, load LTPlus-025v1.91, spoof
liteon earse -> click yes,yes, turn off turn on xtractor and got x90

tried do it 2nd time, and stuck...


UPDATE:

I turn off and on extractor and now I got something like:

http://img225.imageshack.us/img225/4687/extractor.png

 

[rdubbs007]

I turn off and on extractor and now I got something like:

http://img225.imageshack.us/img225/4687/extractor.png

try to intro again when you get that

 

[Jakusza]

Please return the MRA hack device and then ok... (??) Need help here.

Update:

Click ok, then click write = nothing changed. Still

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0xFF
Manufacturer ID: 0xFF
Device ID: 0xFF
Flash Name: Unknown type
Flash Size: n/a
Unknown flash type Write aborted !
Unknown flash type Write aborted !
Unknown flash type Write aborted !

 

[N.E.Modz]

Please return the MRA hack device and then ok... (??) Need help here.

click ok, intro the device until you get flash properties instead of unknown

dale

 

[Jakusza]

Ohhh uhhh I did it!!

C'mon thanks for all You guyz. My 1st flash!!

 

[diaboliq20]

nice one - well done

 

[N.E.Modz]

Ohhh uhhh I did it!!

C'mon thanks for all You guyz. My 1st flash!!

Another one bites the dust lol, well done, easy isnt it ?

dale

 

[DBTarmac]

Just a thought but I would not advise working with electronics on Carpet. No better way to get ESD. Not the issue your having but could lead to bigger issues with one zap..just my $.02