XGD3 Need Help ! Spoofed Samsung to Liteon, Cant Play XGD 3, Please Help.

versatilegames

Junior Member
Dec 16, 2011
10
0
Hi,
I had a Sumsung Drive which was spoofed to Liteon, the F/W being LT 2.1.
I now want to play XGD 3 games on the same console but I have no idea what would make that possible, So I am requesting everyone to make an attempt and help me out.
I had tried flashing it with JF 0.1.94 using almost all the firmwares in the folder, but none of them worked. Please let me know how to make things work.
Thanks
 

RhoTrux64

VIP Member
Jun 22, 2004
591
0
Hi,
I had a Sumsung Drive which was spoofed to Liteon, the F/W being LT 2.1.
I now want to play XGD 3 games on the same console but I have no idea what would make that possible, So I am requesting everyone to make an attempt and help me out.
I had tried flashing it with JF 0.1.94 using almost all the firmwares in the folder, but none of them worked. Please let me know how to make things work.
Thanks
Get a phat Liteon drive.

Sent from my HTC_Amaze_4G using freakin' Tapatalk 4
 
  • Like
Reactions: versatilegames

versatilegames

Junior Member
Dec 16, 2011
10
0
Yeah open jf and flah the firmware for lt3
Thanks,
But the problem I am facing is that everytime I flash it with a Liteon LT3 F/W it gives me an error E 64 when connected to the console.
what do I do, the actual/original drive was a Samsung which was later replaced to a Liteon. Is it still possible to play the XGD 3 games on this console?
 

scott1503

VIP Member
Jul 21, 2012
1,794
88
Harrogate, North Yorkshire , uk
Thanks,
But the problem I am facing is that everytime I flash it with a Liteon LT3 F/W it gives me an error E 64 when connected to the console.
what do I do, the actual/original drive was a Samsung which was later replaced to a Liteon. Is it still possible to play the XGD 3 games on this console?
Yeas but samsung drives run on a different firmware you will have to replace with a samsung drive otherwise if I remember correctly you will get e64 no mater what drive you put in there with hacker firmware
 

versatilegames

Junior Member
Dec 16, 2011
10
0
You need to stick with the original drive model. If it originally had a Samsung in it, then get another Samsung drive. The best way to handle this would be to check the OSIG and be sure you are using the correct drive.
So you mean all I need to do is get a Samsung drive and flash it with "LT-sammy-v2.01" and this should do the trick. Would that also play the XGD3?
 

scott1503

VIP Member
Jul 21, 2012
1,794
88
Harrogate, North Yorkshire , uk
So you mean all I need to do is get a Samsung drive and flash it with "LT-sammy-v2.01" and this should do the trick. Would that also play the XGD3?
Yes along with the correct drive key of course
 
  • Like
Reactions: versatilegames