I have been burning disc for a long time never have any problems. I always use verbatims and almost always singapore ones. I have been using pioneer drives for ever and use imgburn to burn them. The trunicated disc all work fine on my samsung with 14599 dash. However finding more and more issues with my kids and friends xbox
which are liteon drives.
I bought an ihas drive awhile ago I just haven't been using it. Bought a ihas 224b -gloa drive. I flashed it following instructions to a T. I set i to hyper burning and smart burn with eeprom utility, am currently using MKM003 verb media buring at 4x per C4EVA'S instructions. The image I am using was patched with abgx and topology data was patched properly ran again to verify is good image. my sata is set to IDE, I am using onboard sata. I can burn the image using trunicate and it works on my samsung but not on the liteon's tried buring this image 5 times with ihas setup and keeps failing first 4 times would fail right away soon as started burning but used a different onboard sata port and cable and the last time it burned fully but it kept getting errors during verification process. Put in 360 and image shows up but still get unsupported disc. Run disc in abgx and it shows fine good image. This process is starting to really piss me off. Miss the old method burn with imgburn with my pioneer and good as gold.
Now I always make sure to buy singapore disc and have bought from newegg forever and no am a little annoyed they sent me disc from india but have arleady started u sing them so not sure If I can return these perhaps that is my issue. I really need to get this figured out. Does it help if I cross flash to a ihas 624b, have also read about people running in safe mode and tried once but had a sata issue at that moment so not sure if that would fix it properly. I also have verify and OPC checked with the mkm 003 disc at 4x per c4eva instructions. How do I make sure the image was ripped the right way per c4eva instructions is there a program to check that or is running it through abgx sufficent for that. As well how do you patch topology data manually like with mass effect 3 which I heard you have to do.
One more question since my Samsung has no issue with trunicated disc, can I keep using that method for that drive is it possible microsoft can do a new check on the sammy's to kill it.
which are liteon drives. I bought an ihas drive awhile ago I just haven't been using it. Bought a ihas 224b -gloa drive. I flashed it following instructions to a T. I set i to hyper burning and smart burn with eeprom utility, am currently using MKM003 verb media buring at 4x per C4EVA'S instructions. The image I am using was patched with abgx and topology data was patched properly ran again to verify is good image. my sata is set to IDE, I am using onboard sata. I can burn the image using trunicate and it works on my samsung but not on the liteon's tried buring this image 5 times with ihas setup and keeps failing first 4 times would fail right away soon as started burning but used a different onboard sata port and cable and the last time it burned fully but it kept getting errors during verification process. Put in 360 and image shows up but still get unsupported disc. Run disc in abgx and it shows fine good image. This process is starting to really piss me off. Miss the old method burn with imgburn with my pioneer and good as gold.
Now I always make sure to buy singapore disc and have bought from newegg forever and no am a little annoyed they sent me disc from india but have arleady started u sing them so not sure If I can return these perhaps that is my issue. I really need to get this figured out. Does it help if I cross flash to a ihas 624b, have also read about people running in safe mode and tried once but had a sata issue at that moment so not sure if that would fix it properly. I also have verify and OPC checked with the mkm 003 disc at 4x per c4eva instructions. How do I make sure the image was ripped the right way per c4eva instructions is there a program to check that or is running it through abgx sufficent for that. As well how do you patch topology data manually like with mass effect 3 which I heard you have to do.
One more question since my Samsung has no issue with trunicated disc, can I keep using that method for that drive is it possible microsoft can do a new check on the sammy's to kill it.