Need help with d0 point

[jebus1230]

I have a 2.6 lite ce with the solderless adapter everything is installed correctly but it there isn't reading a connection with the d0 point and the wire is in the point perfectly. I tried puting the chip on my friends xbox and it worked right away and we both have a version 1.1 Any suggestions on what I could do would be great.

 

[Big_Whoopin]

Check that you are getting the plugs for the switch cable properly seated. Who's switches were you using when you tested your chip in your friend's box?

-Whoopin'

 

[jebus1230]

I used my chip, cables, switch, and solderless adapter. Everything is plugged in right, and all the points are seated correctly.

 

[jebus1230]

I didn't mention this before the blue light does come on when my chip is hooked up

 

[jebus1230]

does anyone have any suggestions

 

[jebus1230]

anything at this point will be usefull

 

[kim123]

Well, it sounds like you say yourself that the d0 point isn't connected properly on your xbox. refit it and see if it helps. If not maybe you should try to solder it in place instead.

 

[Fantmx]

Are you sure you have a 1.1? Maybe you have the wrong D0 point.

 

[jebus1230]

I am one hundred percent positive I have a 1.1, and the d0 point is correct. What did you mean by refit it, I don't want to solder it on unless it is a last resort.

 

[jebus1230]

Does anyone know if conductive paint would work to repair the d0 point.

 

[Fantmx]

The tutorial below will tell you how to repair a broken trace. How did you break the trace with a solderless install?

How to fix a broken trace.

 

[jebus1230]

Thank you fantmx, for the link, but i went and soldered the chip on with a wire install and it works fine.

 

[Littlemiss]

Gotta love the wire installs