Need help with STBY_CLK disaster please

M

Mdevine79

Noob Account
Mar 6, 2012
7
0
If all the resistors in the STBY_CLK are gone is there a way to fix it? I got a nice slim from a friend who failed miserably at a RGH. I'm average at soldering, Have done a few Xbox drives back in the day with success. If this mess can be cleaned up what would I need and how would I do it? :confused: Thanks in advance.
 
S

stevebentley27

Full Member
Jan 21, 2010
25
0
wales
holy ... thought my stdby clk point was bad but man how did u/or sumone else manage to take all the resistors off!!! , if u have loadsa experience with soldering very small parts to mainboards /components then give it a try otherwise u may be best to send to a pro on here .
 
M

Mister_X

VIP Member
Apr 13, 2011
189
0
Canada
even a well seasoned person would find this job tedious. you need to source the values and the resistors, replace them all. and repair any trace and pad damage.

a nice little hot air station some solder paste and skill can get it done. but its not a average joes job.
 
M

Mdevine79

Noob Account
Mar 6, 2012
7
0
My friend has a temper, I guess he melted 2 resistors and raged and melted them all off...I want to at least try to fix it, I really want to learn, it was a free console so a few bucks won't be an issue as far as DIY I have have all the proper tools, Multi temp soldering gun .08mm tips, flux, all sorts of wire and sizes, assortment of resistors fiberglass pens, exacto knife, ect ect....the way I see it is I can't make it worse :p
 
oO Elite Oo

oO Elite Oo

VIP Member
Sep 3, 2011
1,837
0
In your Nand
Your friend or you should had never touched the motherboard in the first place. This is totally not your job and you are need for a repair.
 
V

Vest1ge

Practice soldering on a few other things before you attempt to repair this.

Blotched RGH repairs are tedious, and require a lot of time!

And then it doesn't always work properly.

But i've seen one like this were the guy tried to solder with a heat gun!
 
M

Mdevine79

Noob Account
Mar 6, 2012
7
0
What about this, this is my resistor mistake on my old Jasper... Any kind of fix? Get 3 red rings when console it powered on.
 
M

Mdevine79

Noob Account
Mar 6, 2012
7
0
dgenx said:
with all the info on soldering out there,how are people still messing these thing up.these repairs aint for you.to save them just send to a pro.

on the slim you be wanting to use 34ohms 0603 resistors plus trace repairs.

on the jasper you need a 10k 0603 resistor.
Click to expand...

Jasper looks/sounds easier to repair, any chance of a little direction on the Jasper? Please.
 
M

Mdevine79

Noob Account
Mar 6, 2012
7
0
dgenx said:
with all the info on soldering out there,how are people still messing these thing up.these repairs aint for you.to save them just send to a pro.

on the slim you be wanting to use 34ohms 0603 resistors plus trace repairs.

on the jasper you need a 10k 0603 resistor.

all the info on repairin theses can be found hear.

http://www.team-xecuter.com/forums/showthread.php?t=74992
Click to expand...
Thanks Have that page bookmarked, The resistor for the fix is gone, So just replace that with the 10k and apply the fix?
 
M

Mister_X

VIP Member
Apr 13, 2011
189
0
Canada
i dont know how people can remove that many resistors unwanted. I can tell you right now with my eye that looks like some one took a hot air station or a heat gun to them with little skill and a lot of air. If you own a hot air station the goal is not to blow away what you are trying to remove guys lol
 
You must log in or register to reply here.