Need help with X2 BIOS on Duo2

[TCIII]

Hi all,

I have always used the Xecuter X3 mod chips on my XBOXes, but a friend wanted to install a Duo2 on a version 1.0 XBOX.

The hardware installation went fine and when the XBOX powered up the screen came up with the Cromwell BIOS (Bank 1).

I then opened the Cromwell BIOS webpage and went ahead and flashed Bank 1 with the X2 version 5035 (Old) BIOS not realizing that the X2 BIOS does not have an OS like X3 and must have the X2 config.ini file on the e: drive.

My question is, can I FTP to the X2 BIOS once the box has powered up and install the X2 config.ini file and an evox dashboard on the HD? I know that the X2 BIOS is working as it is requesting an IP from my router every time it boots up. I have tried several different user names and passwords, but nothing works.

I have half a mind to tell my friend that we ought to install an X3 chip mod and be done with it.

Suggestions?

Regards,
TCIII

 

[DJBOOBY]

the x2 dose not have ftp you will need to make a boot dvd or use a auto install like auto installer deluxe 3 or slayer to ftp to xbox then install x2 config file to E:/ folder

 

[catogtp]

the ini file is not required to boot and will work perfectly fine without it. If you are wanting to customize the ini then you'll need to make a boot disk and ftp the file over or copy it from the boot disk you make.